Información técnica y de seguridad
- Base portadora
- Disolvente
- Base química
- Cera y asfalto
- Color
- Bronce
- Presentación
- Available formats on request
- Pedido mínimo
- Consultar
Etiquetado y seguridad
Revisión de la FDS: GHS 6.0 — 01.11.2025
Palabra de advertencia: Atención
Indicaciones de peligro
- H226: Líquidos y vapores inflamables.
- H336: Puede provocar somnolencia o vértigo.
Consejos de prudencia
- P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
- P261: Evitar respirar la niebla/los vapores.
- P303+P361+P353: EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente toda la ropa contaminada. Enjuagar la piel con agua.
- P304+P340: EN CASO DE INHALACIÓN: Transportar a la persona al aire libre y mantenerla en una posición que le facilite la respiración.
- P312: Llamar a un CENTRO DE TOXICOLOGÍA/médico si la persona se encuentra mal.
- P370+P378: En caso de incendio: Utilice arena seca, polvo extintor o espuma resistente al alcohol para extinguir.
- P403+P233: Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.
Información suplementaria
- EUH066: La exposición repetida puede provocar sequedad o formación de grietas en la piel.
Componentes peligrosos para el etiquetado
Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics
Documentación
Ficha técnica en español Guía de aplicación Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
Tectyl 120 is a filled, solvent cutback, wax/asphaltic base, thixotropic, corrosion preventive compound. Tectyl 120 is suitable for the complete undercoating of undersides of autos, trucks, buses, truck trailers, camp trailers, heavy construction equipment and cargo containers. Tectyl 120 dries to a firm, bronze colored, resilient, tough and abrasion resistant film.
Benefits and application considerations
- Superior Protection At the recommended DFT, the water resistance and displacement provides extraordinary protection against corrosion.
- Multi-functional Tectyl 120 can be applied on many different vehicles, such as cars, trucks, busses, campers, but also trailers and caravans.
- Processing Tectyl 120 is an easy to apply, elastic, protective underbody coating.
- Multiple substrates The underbody coating can also be used on different substrates, such as the wooden underside of a camper or caravan.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 250 µm
- Corrosion — ISO 9227 NSS (min. days)
- 40 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 21 months
- Fire Approval — DIN 54837
- S4, SR2, ST2
Surface preparation
The maximum performance of Tectyl 120 can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Avoid direct contact of the product with PVC due to possible material incompatibility.
Application
Tectyl 120 is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10 – 35 °C at the time of product application. Tectyl 120 can be applied by airless spray or brush. Details on application can be found in the application chart.
Removal
Tectyl 120 can in the wet phase be removed with Tectyl Biocleaner or Tectyl 150 or low-pressure steam. If dried and cured the film of Tectyl 120 can be removed with Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.