Technical and safety information
- Carrier
- Solvent
- Chemical base
- Cera y asfalto
- Colour
- Bronce
- Pack format
- Consultar formatos disponibles
- Minimum order
- Consultar
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Application guide Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 120 is a filled, solvent cutback, wax/asphaltic base, thixotropic, corrosion preventive compound. Tectyl 120 is suitable for the complete undercoating of undersides of autos, trucks, buses, truck trailers, camp trailers, heavy construction equipment and cargo containers. Tectyl 120 dries to a firm, bronze colored, resilient, tough and abrasion resistant film.
Benefits and application considerations
- Superior Protection At the recommended DFT, the water resistance and displacement provides extraordinary protection against corrosion.
- Multi-functional Tectyl 120 can be applied on many different vehicles, such as cars, trucks, busses, campers, but also trailers and caravans.
- Processing Tectyl 120 is an easy to apply, elastic, protective underbody coating.
- Multiple substrates The underbody coating can also be used on different substrates, such as the wooden underside of a camper or caravan.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 250 µm
- Corrosion — ISO 9227 NSS (min. days)
- 40 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 21 months
- Fire Approval — DIN 54837
- S4, SR2, ST2
Surface preparation
The maximum performance of Tectyl 120 can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Avoid direct contact of the product with PVC due to possible material incompatibility.
Application
Tectyl 120 is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10 – 35 °C at the time of product application. Tectyl 120 can be applied by airless spray or brush. Details on application can be found in the application chart.
Removal
Tectyl 120 can in the wet phase be removed with Tectyl Biocleaner or Tectyl 150 or low-pressure steam. If dried and cured the film of Tectyl 120 can be removed with Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.