Ir al contenido

Tectyl™ TPC Invisible

Referencia TECTYL-TPC-INVISIBLE
Precio bajo consulta

Confirma formato, cantidad y aplicación con nuestro equipo técnico.

Consultar precio y disponibilidad
Términos y condiciones
Grantía de devolución de 30 días
Envío: 2-3 días laborables

Información técnica y de seguridad

Producto químico
Base portadora
Agua
Base química
Según ficha técnica oficial
Color
Transparente
Presentación
Available formats on request
Pedido mínimo
Consultar

Etiquetado y seguridad

Revisión de la FDS: GHS 2.0 — 16.11.2025

Esta mezcla no requiere elementos de etiqueta CLP según la FDS vigente.

Documentación

Ficha técnica en español Ficha de datos de seguridad

Las fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.

Tectyl TPC Invisible is a corrosion preventive concentrate, developed for diluting in water. Tectyl TPC Invisible can be used as a temporary surface corrosion protection of industrial and automotive parts and equipment for indoor storage, without the need for removal afterwards. Tectyl TPC Invisible gives a clear, transparent and, in most cases, a non-tacky film.

Benefits and application considerations

  • Excellent performance Tectyl TPC Invisible gives excellent corrosion protection in high humid environments which makes it a very versatile corrosion preventative.
  • User Efficiency A 3% dilution in water gives already a strong corrosion protective layer, which allows metal parts to be stored in industrial indoor environments for 1-6 months without additional protection.
  • Invisible and no removal needed The corrosion preventative layer is transparent and doesn’t leave a waxy film which makes it very suitable for after-treatments without the necessary removal in most cases.

Technical characteristics

Carrier
Water
Protection Indoor — (min. months)
6 months
Protection Outdoor — (min. months)
n.a

Surface preparation

The maximum performance of Tectyl TPC Invisible can be achieved only when the metal surfaces to be protected are clean (non-contaminated). CorPro recommends a substrate temperature of 10-35 °C at the time of product application.

Application

Tectyl TPC Invisible is intended to be diluted in water. For best result, add 3% of Tectyl TPC Invisible to the water. Ideally demineralized or distilled water should be used. Normal tap water can be used as well with a higher percentage (at least 5%) of Tectyl TPC Invisible.

Slight mixing before usage everyday will allow a homogeneous mixture.

Tectyl TPC Invisible is not intended for use on machinery which can come in contact with food.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.