Technical and safety information
Online Tectyl checkout is currently configured for Spain. For deliveries elsewhere in Europe, contact Coapsys to confirm availability and shipping before ordering.
- Carrier
- Water
- Chemical base
- Según ficha técnica oficial
- Colour
- Transparente
- Pack format
- Consultar formatos disponibles
- Minimum order
- Consultar
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl TPC Invisible is a corrosion preventive concentrate, developed for diluting in water. Tectyl TPC Invisible can be used as a temporary surface corrosion protection of industrial and automotive parts and equipment for indoor storage, without the need for removal afterwards. Tectyl TPC Invisible gives a clear, transparent and, in most cases, a non-tacky film.
Benefits and application considerations
- Excellent performance Tectyl TPC Invisible gives excellent corrosion protection in high humid environments which makes it a very versatile corrosion preventative.
- User Efficiency A 3% dilution in water gives already a strong corrosion protective layer, which allows metal parts to be stored in industrial indoor environments for 1-6 months without additional protection.
- Invisible and no removal needed The corrosion preventative layer is transparent and doesn’t leave a waxy film which makes it very suitable for after-treatments without the necessary removal in most cases.
Technical characteristics
- Carrier
- Water
- Protection Indoor — (min. months)
- 6 months
- Protection Outdoor — (min. months)
- n.a
Surface preparation
The maximum performance of Tectyl TPC Invisible can be achieved only when the metal surfaces to be protected are clean (non-contaminated). CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl TPC Invisible is intended to be diluted in water. For best result, add 3% of Tectyl TPC Invisible to the water. Ideally demineralized or distilled water should be used. Normal tap water can be used as well with a higher percentage (at least 5%) of Tectyl TPC Invisible.
Slight mixing before usage everyday will allow a homogeneous mixture.
Tectyl TPC Invisible is not intended for use on machinery which can come in contact with food.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.