Ir al contenido

Tectyl™ 550-ML

Referencia TECTYL-550-ML
Precio bajo consulta

Confirma formato, cantidad y aplicación con nuestro equipo técnico.

Consultar precio y disponibilidad
Términos y condiciones
Grantía de devolución de 30 días
Envío: 2-3 días laborables

Información técnica y de seguridad

Producto químico
Base portadora
Disolvente
Base química
Según ficha técnica oficial
Color
Ámbar
Presentación
Available formats on request
Pedido mínimo
Consultar

Etiquetado y seguridad

Revisión de la FDS: GHS 7.0 — 09.02.2026

Palabra de advertencia: Atención

GHS02: LlamaGHS07: Signo de exclamación

Indicaciones de peligro

  • H226: Líquidos y vapores inflamables.
  • H336: Puede provocar somnolencia o vértigo.
  • H412: Nocivo para los organismos acuáticos, con efectos duraderos.

Consejos de prudencia

  • P101: Si se necesita consejo médico, tener a mano el envase o la etiqueta.
  • P102: Mantener fuera del alcance de los niños.
  • P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
  • P271: Utilizar únicamente en exteriores o en un lugar bien ventilado.
  • P370+P378: En caso de incendio: Utilice arena seca, polvo extintor o espuma resistente al alcohol para extinguir.
  • P403+P233: Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.
  • P405: Guardar bajo llave.
  • P501: Eliminar el contenido/el recipiente en toda instalación de tratamiento de residuos autorizada.

Información suplementaria

  • EUH066: La exposición repetida puede provocar sequedad o formación de grietas en la piel.

Componentes peligrosos para el etiquetado

Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics

Documentación

Ficha técnica en español Guía de aplicación Ficha de datos de seguridad

Las fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.

Tectyl™ 550-ML is a solvent-based, wax-based corrosion protection. Tectyl™ 550-ML has good water-displacing properties and good penetration, making it very suitable as corrosion protection for the inside of car doors and other hollow profiles of cars and other vehicles. Tectyl™ 550-ML cures to an amber-colored, waxy, semi-solid, translucent film.

Benefits and application considerations

  • Superior Protection Tectyl 550-ML will protect against corrosion and will displace water where needed.
  • Strong penetration With its strong penetration, Tectyl 550-ML will protect the surface against corrosion, even in small seams and crevices.

Technical characteristics

Carrier
Solvent
Recommended Dry Film Thickness — Over metal profile
50 µm
Corrosion — ISO 9227 NSS (min. days)
21 days
Humidity — ISO 6270-2 CH (min. days)
75 days
Protection Indoor — (min. months)
24 months

Surface preparation

The maximum performance of Tectyl 550-ML can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.

Application

Tectyl 550-ML is formulated to be used as supplied. Do not thin Tectyl 550-ML. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl 550-ML can be applied by low pressure air spray or dipping. Details on application can be found in the application chart.

Removal

Tectyl 550-ML can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl 550-ML can be removed with Tectyl Biocleaner or Tectyl 150.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.