Información técnica y de seguridad
Empresas de la UE con NIF intracomunitario válido pueden pagar el producto y el transporte estimado juntos al finalizar la compra. El transporte es el 10 % del subtotal de mercancía sin IVA; la expedición exige verificar la documentación de seguridad en el idioma de destino y los requisitos de transporte químico.
- Base portadora
- Disolvente
- Base química
- Cera
- Color
- Transparente
- Presentación
- Bidón 20 L
- Pedido mínimo
- 1 envase
Etiquetado y seguridad
Revisión de la FDS: GHS 9.0 — 06.02.2026
Palabra de advertencia: Peligro
Indicaciones de peligro
- H226: Líquidos y vapores inflamables.
- H304: Puede ser mortal en caso de ingestión y penetración en las vías respiratorias.
- H336: Puede provocar somnolencia o vértigo.
Consejos de prudencia
- P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
- P261: Evitar respirar la niebla/los vapores.
- P301+P310: EN CASO DE INGESTIÓN: Llamar inmediatamente a un CENTRO DE TOXICOLOGĺA/médico.
- P303+P361+P353: EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente toda la ropa contaminada. Enjuagar la piel con agua.
- P370+P378: En caso de incendio: Utilice arena seca, polvo extintor o espuma resistente al alcohol para extinguir.
- P403+P233: Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.
Información suplementaria
- EUH066: La exposición repetida puede provocar sequedad o formación de grietas en la piel.
Componentes peligrosos para el etiquetado
Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics, Destilados (petróleo), fracción parafínica pesada tratada con hidrógeno, Distillates (petroleum), hydrotreated light paraffinic
Documentación
Ficha técnica en español Guía de aplicación Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
Tectyl 502-C is a solvent cutback, soft wax base, corrosion preventive compound. Tectyl 502-C is designed to protect the insides of gearboxes, without removal after installation. Tectyl 502-C is designed to protect parts in indoor and covered storage and shipment. Tectyl 502-C is designed to protect ferrous and non-ferrous parts for indoor or covered storage and during shipment. Tectyl 502-C cures to a dark amber, transparent, soft greasy film.
Benefits and application considerations
- Superior Protection At the recommended DFT Tectyl 502-C will protect against corrosion during storage, domestic and overseas transport.
- Processing Tectyl 502-C is easy to apply and easy to remove, when no longer needed.
- Economical With a DFT of only 50 microns, Tectyl 502-C can protect a big surface with just little amount of the product.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 25 µm
- Corrosion — ISO 9227 NSS (min. days)
- 7 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 40 days
- Protection Indoor — (min. months)
- 24 months
- Protection Outdoor — (min. months)
- 6 months
- MIL-PRF-16173E — Grade / class
- 2/2
Surface preparation
The maximum performance of Tectyl 502-C cutbacks can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends that the metal substrate temperature is 10-35 °C at the time of product application. Direct contact of Tectyl 502-C with PVC can cause compatibility problems. Please test prior to use.
Application
Tectyl 502-C is formulated to be used as supplied. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Do not thin Tectyl 502-C. Incorrect thinning will affect film build, dry time and product performance. Tectyl 502-C can be applied by low pressure air spray or dipping. Details on application can be found in the application chart.
Removal
Tectyl 502-C can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured the film of Tectyl 502-C can be removed with Tectyl Biocleaner or Tectyl 150. When applied in a gearbox or similar application, Tectyl 502-C does not need to be removed and will dissolve in the oil.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.