Información técnica y de seguridad
Empresas de la UE con NIF intracomunitario válido pueden pagar el producto y el transporte estimado juntos al finalizar la compra. El transporte es el 10 % del subtotal de mercancía sin IVA; la expedición exige verificar la documentación de seguridad en el idioma de destino y los requisitos de transporte químico.
- Base portadora
- Disolvente
- Base química
- Cera y asfalto
- Color
- Negro
- Presentación
- Bidón 20 L
- Pedido mínimo
- 1 envase
Etiquetado y seguridad
Revisión de la FDS: GHS 6.0 — 01.11.2025
Palabra de advertencia: Atención
Indicaciones de peligro
- H226: Líquidos y vapores inflamables.
- H336: Puede provocar somnolencia o vértigo.
Consejos de prudencia
- P101: Si se necesita consejo médico, tener a mano el envase o la etiqueta.
- P102: Mantener fuera del alcance de los niños.
- P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
- P271: Utilizar únicamente en exteriores o en un lugar bien ventilado.
- P370+P378: En caso de incendio: Utilice arena seca, polvo extintor o espuma resistente al alcohol para extinguir.
- P403+P233: Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.
- P405: Guardar bajo llave.
- P501: Eliminar el contenido/el recipiente en toda instalación de tratamiento de residuos autorizada.
Información suplementaria
- EUH066: La exposición repetida puede provocar sequedad o formación de grietas en la piel.
Componentes peligrosos para el etiquetado
Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics
Documentación
Ficha técnica en español Guía de aplicación Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
Tectyl 122-A is a solvent cutback wax / asphaltic base, thixotropic corrosion preventive compound. Tectyl 122-A is suitable to be applied to the undersides of vehicles. Tectyl 122-A dries to a relatively firm, black, resilient, tough film.
Benefits and application considerations
- Protection at high temperatures Tectyl 122-A is very suitable as a protective coating in areas where high temperatures in combination with periods under the dew point occur.
- Multi-functional Tectyl 122-A can be applied on many different vehicles, such as cars, trucks, busses, campers and construction equipment, but also trailers and caravans.
- Processing Tectyl 122-A is an easy to apply, elastic, protective underbody coating.
- Multiple substrates The underbody coating can also be used on different substrates, such as the wooden underside of a camper or caravan.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 250 µm
- Corrosion — ISO 9227 NSS (min. days)
- 40 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 21 months
Surface preparation
The maximum performance of Tectyl 122-A can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Avoid direct contact of the product with PVC due to possible material incompatibility.
Application
Tectyl 122-A is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl 122-A can be applied by airless spray or brush. Details on application can be found in the application chart.
Removal
Tectyl 122-A can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured the film of Tectyl 122-A can be removed with Tectyl Biocleaner or Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.