Skip to Content

Tectyl™ 122-A — Drum 20 L

Referencia 23600007
Purchase price Full drum of 20 L
394.77 € VAT incl.

Consultar disponibilidad

Estimated shipping date: 20/11/2026

Indicative price per litre 19.74 € per litre · VAT incl.
Quantity 1 means one complete, indivisible drum, not one litre.
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Technical and safety information

Chemical product

EU consumers can pay for the product and estimated shipping together, with Spanish VAT while the distance-sales conditions are met. Businesses with a validated EU VAT number may qualify for VAT exemption at checkout. Shipping is 10% of the merchandise subtotal before VAT; dispatch requires destination-language safety documentation and chemical transport checks.

Carrier
Solvent
Chemical base
Cera y asfalto
Colour
Negro
Pack format
Drum 20 L
Minimum order
1 unit

For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.

Tectyl 122-A is a solvent cutback wax / asphaltic base, thixotropic corrosion preventive compound. Tectyl 122-A is suitable to be applied to the undersides of vehicles. Tectyl 122-A dries to a relatively firm, black, resilient, tough film.

Benefits and application considerations

  • Protection at high temperatures Tectyl 122-A is very suitable as a protective coating in areas where high temperatures in combination with periods under the dew point occur.
  • Multi-functional Tectyl 122-A can be applied on many different vehicles, such as cars, trucks, busses, campers and construction equipment, but also trailers and caravans.
  • Processing Tectyl 122-A is an easy to apply, elastic, protective underbody coating.
  • Multiple substrates The underbody coating can also be used on different substrates, such as the wooden underside of a camper or caravan.

Technical characteristics

Carrier
Solvent
Recommended Dry Film Thickness — Over metal profile
250 µm
Corrosion — ISO 9227 NSS (min. days)
40 days
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
100 days
Protection Indoor — (min. months)
36 months
Protection Outdoor — (min. months)
21 months

Surface preparation

The maximum performance of Tectyl 122-A can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Avoid direct contact of the product with PVC due to possible material incompatibility.

Application

Tectyl 122-A is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl 122-A can be applied by airless spray or brush. Details on application can be found in the application chart.

Removal

Tectyl 122-A can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured the film of Tectyl 122-A can be removed with Tectyl Biocleaner or Tectyl 150.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.