Ir al contenido

Tectyl™ 300G Clear E

Referencia TECTYL-300G-CLEAR-E
Precio bajo consulta

Confirma formato, cantidad y aplicación con nuestro equipo técnico.

Consultar precio y disponibilidad
Términos y condiciones
Grantía de devolución de 30 días
Envío: 2-3 días laborables

Información técnica y de seguridad

Producto químico
Base portadora
Agua
Base química
Dispersión acuosa
Color
Transparente
Presentación
Available formats on request
Pedido mínimo
Consultar

Etiquetado y seguridad

Revisión de la FDS: GHS 8.0 — 09.02.2026

Palabra de advertencia: Atención

GHS07: Signo de exclamación

Indicaciones de peligro

  • H319: Provoca irritación ocular grave.

Consejos de prudencia

  • P264: Lavarse las manos concienzudamente tras la manipulación.
  • P280: Llevar gafas/máscara de protección.
  • P305+P351+P338: EN CASO DE CONTACTO CON LOS OJOS: Enjuagar con agua cuidadosamente durante varios minutos. Quitar las lentes de contacto cuando estén presentes y pueda hacerse con facilidad. Proseguir con el lavado.
  • P337+P313: Si persiste la irritación ocular: Consultar a un médico.

Información suplementaria

  • EUH208: Contiene Cobalt bis(2-ethylhexanoate). Puede provocar una reacción alérgica.

Documentación

Ficha técnica en español Guía de aplicación Ficha de datos de seguridad

Las fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.

Tectyl 300G Clear E is a waterborne corrosion preventive coating. The cured film is hard, transparent and flexible. Tectyl 300G Clear E provides an effective barrier against corrosive environments for ferrous and non-ferrous fabrications and industrial components.

Benefits and application considerations

  • Excellent flexibility Due to its mechanical properties, the surface is protected over a long period of time, even with a 180° Mandrell bend.
  • Overcoatable Tectyl 300G Clear E is recoatable with topcoat systems. Test on a small area first to ensure compatibility between Tectyl 300G Clear E and the topcoat.
  • Final result Tectyl 300G Clear E leaves an excellent transparent finish that facilitates visual inspection of the surface.
  • Can be applied almost anywhere Due to the transparent, flexible coating, Tectyl 300G Clear E can be used almost anywhere.

Technical characteristics

Carrier
Water
Recommended Dry Film Thickness — Over metal profile
50 µm
Corrosion — ISO 9227 NSS (min. days)
21 days
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
21 days
Protection Indoor — (min. months)
36 months
Protection Outdoor — (min. months)
12 months
Weathering — ASTM G23 (min. hours)
500 hours
Mandrel Bend — 180°
PASS

Surface preparation

The maximum performance of Tectyl 300G Clear E can be achieved only when the metal surface to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends that the metal substrate temperature be 10-35 °C at the time of product application.

Application

Tectyl 300G Clear E is formulated to be used as supplied. Ensure uniform consistency prior to use. If the product thickens due to cold storage or loss of water and coalescing during use, contact CorPro. Do not thin Tectyl 300G Clear E. Incorrect thinning will affect film build, dry time and product performance. Tectyl 300G Clear E can be airless spray or dip applied. Details on application can be found in the application chart.

Removal

Tectyl 300G is not intended for removal. In the wet phase Tectyl 300G in the wet phase can be removed with water or Tectyl Biocleaner. If dried and cured the film can be removed with ethyl acetate.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.