Ir al contenido

Tectyl™ 858-F

Referencia TECTYL-858-F
Precio bajo consulta

Confirma formato, cantidad y aplicación con nuestro equipo técnico.

Consultar precio y disponibilidad
Términos y condiciones
Grantía de devolución de 30 días
Envío: 2-3 días laborables

Información técnica y de seguridad

Producto químico
Base portadora
Sin disolvente
Base química
Grasa
Color
Transparente
Presentación
Available formats on request
Pedido mínimo
Consultar

Etiquetado y seguridad

Revisión de la FDS: GHS 2.1 — 16.11.2025

Esta mezcla no requiere elementos de etiqueta CLP según la FDS vigente.

Información suplementaria

  • EUH210: Puede solicitarse la ficha de datos de seguridad.

Documentación

Ficha técnica en español Ficha de datos de seguridad

Las fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.

Tectyl 858-F is a homogeneous NLGI number 2 consistency grade multipurpose grease and corrosion preventive compound. Tectyl 858-F can be used for lubrication and surface corrosion protection of industrial and automotive equipment operating over the temperature range of -30° to 120 °C. Tectyl 858-F gives a greasy, amber and semi-transparent film.

Benefits and application considerations

  • Excellent low temperature performance Tectyl 858-F is a modern high performance synthetic grease, suitable for both industrial and automotive applications and in centralized lubrication systems.
  • Good corrosion protection The grease contains antioxidants, corrosion inhibitors and EP/AW additives and can be used in unfavorable working conditions, like damp atmosphere or dusty surroundings.
  • Very good mechanical stability The special low viscous synthetic oil gives the product very low starting and running torques making it suitable for warm and low temperature applications.
  • Suitable for high speed applications The grease is also suitable for bearings operating at high speed.

Technical characteristics

Carrier
Non Solvent
Protection Indoor — (min. months)
n.a
Protection Outdoor — (min. months)
n.a

Surface preparation

The maximum performance of Tectyl 858-F can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends that the metal substrate temperature is -18°C – +49 °C at the time of product application.

Application

Tectyl 858-F is formulated to be used as supplied. Do not thin Tectyl 858-F. Tectyl 858-Fcan be applied by hand, grease gun, or pump. Apply Tectyl 858-F between -18°C and +49°C. Details on application can be found in the application chart.

Tectyl 858-F may be used in applications where NLGI Number 2 consistency grease with oxidation resistance and corrosion preventive properties are required.

Tectyl 858-F is not intended for use on machinery that comes in contact with food.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.