Información técnica y de seguridad
- Base portadora
- Cera
- Base química
- Cera
- Color
- Ámbar
- Presentación
- Available formats on request
- Pedido mínimo
- Consultar
Etiquetado y seguridad
Revisión de la FDS: GHS 5.0 — 27.10.2025
Palabra de advertencia: Peligro
Indicaciones de peligro
- H222: Aerosol extremadamente inflamable.
- H229: Recipiente a presión: Puede reventar si se calienta.
- H336: Puede provocar somnolencia o vértigo.
Consejos de prudencia
- P101: Si se necesita consejo médico, tener a mano el envase o la etiqueta.
- P102: Mantener fuera del alcance de los niños.
- P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
- P211: No pulverizar sobre una llama abierta u otra fuente de ignición.
- P251: No perforar ni quemar, incluso después de su uso.
- P271: Utilizar únicamente en exteriores o en un lugar bien ventilado.
- P405: Guardar bajo llave.
- P410+P412: Proteger de la luz del sol. No exponer a temperaturas superiores a 50 °C/122 °F.
- P501: Eliminar el contenido/el recipiente en toda instalación de tratamiento de residuos autorizada.
Información suplementaria
- EUH066: La exposición repetida puede provocar sequedad o formación de grietas en la piel.
Etiquetado adicional
Extremadamente inflamable. Mantener fuera del alcance de los niños. Contiene gas a presión: Puede reventar si se calienta. Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar. No perforar ni quemar, incluso después de su uso. Proteger de la luz del sol. No exponer a temperaturas superiores a 50 °C/122°F.
Componentes peligrosos para el etiquetado
Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics
Documentación
Ficha técnica en español Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
Tectyl Cavity Wax Amber is a wax based, solvent cutback, amber colored corrosion preventive. It has good water displacing and penetration properties, making it very suitable as a corrosion protective for the inside of car doors and other hollow sections of cars and rolling equipment. Tectyl Cavity Wax Amber cures to an amber colored, waxy, semi-firm translucent film.
Benefits and application considerations
- Superior Protection Tectyl Cavity Wax Amber will protect against corrosion and will displace water where needed.
- Strong penetration With its strong penetration, Tectyl Cavity Wax Amber will protect the surface against corrosion, even in small seams and crevices.
Technical characteristics
- Carrier
- Wax
- Recommended Dry Film Thickness — Over metal profile
- 50 µm
- Corrosion — ISO 9227 NSS (min. days)
- 21 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 75 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 12 months
Surface preparation
The maximum performance of Tectyl Cavity Wax Amber can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl Cavity Wax Amber gives a maximum performance when it is sprayed at an ambient and product temperature of 10-25 °C. Shake the can well before use and spray at a distance of approximately 30 cm from the surface.
Removal
Tectyl Cavity Wax Amber can be removed in the wet phase with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl Cavity Wax Amber can be removed with Tectyl Biocleaner or Tectyl 50.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.