Ir al contenido

Tectyl™ 558-AMC

Referencia TECTYL-558-AMC
Precio bajo consulta

Confirma formato, cantidad y aplicación con nuestro equipo técnico.

Consultar precio y disponibilidad
Términos y condiciones
Grantía de devolución de 30 días
Envío: 2-3 días laborables

Información técnica y de seguridad

Producto químico
Base portadora
Disolvente
Base química
Cera
Color
Ámbar
Presentación
Available formats on request
Pedido mínimo
Consultar

Etiquetado y seguridad

Revisión de la FDS: GHS 7.0 — 09.02.2026

Palabra de advertencia: Atención

GHS02: LlamaGHS07: Signo de exclamación

Indicaciones de peligro

  • H226: Líquidos y vapores inflamables.
  • H336: Puede provocar somnolencia o vértigo.

Consejos de prudencia

  • P101: Si se necesita consejo médico, tener a mano el envase o la etiqueta.
  • P102: Mantener fuera del alcance de los niños.
  • P103: Leer atentamente y seguir todas las instrucciones.
  • P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
  • P261: Evitar respirar la niebla/los vapores.
  • P303+P361+P353: EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente toda la ropa contaminada. Enjuagar la piel con agua.
  • P304+P340: EN CASO DE INHALACIÓN: Transportar a la persona al aire libre y mantenerla en una posición que le facilite la respiración.
  • P312: Llamar a un CENTRO DE TOXICOLOGÍA/médico si la persona se encuentra mal.
  • P370+P378: En caso de incendio: Utilice arena seca, polvo extintor o espuma resistente al alcohol para extinguir.
  • P403+P233: Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.

Información suplementaria

  • EUH066: La exposición repetida puede provocar sequedad o formación de grietas en la piel.

Componentes peligrosos para el etiquetado

Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics

Documentación

Ficha técnica en español Guía de aplicación Ficha de datos de seguridad

Las fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.

Tectyl 558-AMC is an amber colored, solvent cutback, slightly thixotropic wax base corrosion preventive compound with good water displacing properties. Tectyl 558-AMC is primarily intended for spray application such as enclosed boxes, seams, joints and other creviced locations of vehicles, susceptible to corrosion. Tectyl 558-AMC is recommended as a primer coat for 2-layer systems for several solvent based Tectyl products. Tectyl 558-AMC dries to a dark amber colored, translucent, waxy, semi-firm, slightly tacky film.

Benefits and application considerations

  • Strong penetration With its strong penetration, Tectyl 558-AMC will protect the surface against corrosion, even in small seams and crevices.
  • Economical With a DFT of only 50 microns, Tectyl 558-AMC can protect a large surface area with just a little amount of the product.
  • Protection against corrosion Tectyl 558-AMC will protect against corrosion and will displace water where needed.
  • Dual coating with Tectyl 120, Tectyl 120-EH, Tectyl 121-LV, Tectyl 122-A When applying Tectyl 120, Tectyl 120-EH, Tectyl 121-LV or Tectyl 122-A on top of Tectyl 558-AMC, the combination makes an underbody coating with excellent corrosion resistance.

Technical characteristics

Carrier
Solvent
Recommended Dry Film Thickness — Over metal profile
50 µm
Corrosion — ISO 9227 NSS (min. days)
21 days
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
75 days
Protection Indoor — (min. months)
24 months
SFS 4086: 2006
Pass

Surface preparation

The maximum performance of Tectyl 558-AMC can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends that the metal substrate temperature is 10-35 °C at the time of product application.

Application

Tectyl 558-AMC is formulated to be used as supplied. Do not thin Tectyl 558-AMC. Due to its composition. Tectyl 558-AMC can be applied by low-pressure air spray. Details on application can be found in the application chart.

Tectyl 558-AMC is recommended as a primer coat for 2-layer systems and after a relatively short drying period Tectyl 558-AMC can be sprayed over.

Removal

Tectyl 558-AMC can in the wet phase be removed with Tectyl Biocleaner or Tectyl 150 or low- pressure steam. If dried and cured the film of Tectyl 558-AMC can be removed with Tectyl Biocleaner or Tectyl 150.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.