Información técnica y de seguridad
- Base portadora
- Disolvente
- Base química
- Cera y asfalto
- Color
- Negro
- Presentación
- Available formats on request
- Pedido mínimo
- Consultar
Etiquetado y seguridad
Revisión de la FDS: GHS 5.0 — 01.11.2025
Palabra de advertencia: Atención
Indicaciones de peligro
- H226: Líquidos y vapores inflamables.
- H336: Puede provocar somnolencia o vértigo.
Consejos de prudencia
- P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
- P261: Evitar respirar la niebla/los vapores.
- P303+P361+P353: EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente toda la ropa contaminada. Enjuagar la piel con agua.
- P304+P340: EN CASO DE INHALACIÓN: Transportar a la persona al aire libre y mantenerla en una posición que le facilite la respiración.
- P312: Llamar a un CENTRO DE TOXICOLOGÍA/médico si la persona se encuentra mal.
- P370+P378: En caso de incendio: Utilice arena seca, polvo extintor o espuma resistente al alcohol para extinguir.
- P403+P233: Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.
Información suplementaria
- EUH066: La exposición repetida puede provocar sequedad o formación de grietas en la piel.
Componentes peligrosos para el etiquetado
Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics
Documentación
Ficha técnica en español Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
Tectyl Bodysafe is a solvent cutback wax/asphaltic base, thixotropic corrosion preventive compound. Tectyl Bodysafe is suitable to be applied to the undersides of vehicles. Tectyl Bodysafe cures to a relatively firm, black, resilient, tough film.
Benefits and application considerations
- Superior Protection At the recommended DFT, Tectyl Bodysafe gives extraordinary protection against stone chipping and corrosion.
- Multi-functional Tectyl Bodysafe can be applied on many different vehicles, such as cars, trucks, busses, campers, but also trailers and caravans.
- Processing Tectyl Bodysafe is an easy to apply, elastic, protective underbody coating.
- Multiple substrates The underbody coating can also be used on different substrates, such as the wooden underside of a camper or caravan.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 250 µm
- Corrosion — ISO 9227 NSS (min. days)
- 40 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 18 months
Surface preparation
The maximum performance of Tectyl Bodysafe can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Avoid direct contact of the product with PVC due to possible material incompatibility.
Application
Tectyl Bodysafe is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10-35 °C at the time of product application. Do not apply Tectyl Bodysafe on mechanical moving parts or on catalytic converters. Tectyl Bodysafe can be applied by brush. Details on application can be found in the application chart.
Removal
In the wet phase Tectyl Bodysafe can be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl Bodysafe can be removed with Tectyl Biocleaner or Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.