Información técnica y de seguridad
- Base portadora
- Disolvente
- Base química
- Caucho y resina
- Color
- Negro
- Presentación
- Available formats on request
- Pedido mínimo
- Consultar
Etiquetado y seguridad
Revisión de la FDS: GHS 7.0 — 16.11.2025
Palabra de advertencia: Peligro
Indicaciones de peligro
- H225: Líquido y vapores muy inflamables.
- H315: Provoca irritación cutánea.
- H336: Puede provocar somnolencia o vértigo.
- H411: Tóxico para los organismos acuáticos, con efectos nocivos duraderos.
Consejos de prudencia
- P101: Si se necesita consejo médico, tener a mano el envase o la etiqueta.
- P102: Mantener fuera del alcance de los niños.
- P103: Leer atentamente y seguir todas las instrucciones.
- P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
- P271: Utilizar únicamente en exteriores o en un lugar bien ventilado.
- P280: Llevar guantes/gafas/máscara de protección.
- P303+P361+P353: EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente toda la ropa contaminada. Enjuagar la piel con agua.
- P391: Recoger el vertido.
- P403+P233: Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.
- P405: Guardar bajo llave.
- P501: Eliminar el contenido/el recipiente en toda instalación de tratamiento de residuos autorizada. Advertencia detectable al tacto sí
Componentes peligrosos para el etiquetado
Naphtha (petroleum), hydrotreated light, Cyclohexane, Ethyl acetate, Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane
Documentación
Ficha técnica en español Guía de aplicación Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
TECTYL 190 Black is a black colored, solvent cutback, rubber/resin based corrosion preventive compound. TECTYL 190 Black is fast drying, has sound deadening properties and can be painted over. TECTYL 190 Black is recommended for the protection against corrosion and abrasive damage of ferrous metals and the underbodies of autos, trucks, trailers, etc. TECTYL 190 Black cures to a black, firm, resilient, tough film.
Benefits and application considerations
- Strong and Elastic protection Tectyl 190 Black creates a strong and elastic layer to prevent stone chipping on your vehicle.
- Overcoatable Tectyl 190 Black is overcoatable, so your vehicle keeps looking great.
- Processing Tectyl 190 Black is available in a vacuum can for easy application.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 250 µm
- Corrosion — ISO 9227 NSS (min. days)
- 40 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 21 months
- Gravel-o-Meter (Stone chip) Test SAE-J-400
- 4A - 4B
Surface preparation
The maximum performance of Tectyl 190 Black can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl 190 Black is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10-35°C at the time of product application. Tectyl 190 Black can be applied by airless spray, vacuum spray guns or pressure can spray guns. Details on application can be found in the application chart.
Removal
Tectyl 190 Black is not intended for removal. In the wet phase Tectyl 190 Black can be removed with Tectyl 150 or low-pressure steam. If dried and cured Tectyl 190 Black can not be removed.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.