Información técnica y de seguridad
Empresas de la UE con NIF intracomunitario válido pueden pagar el producto y el transporte estimado juntos al finalizar la compra. El transporte es el 10 % del subtotal de mercancía sin IVA; la expedición exige verificar la documentación de seguridad en el idioma de destino y los requisitos de transporte químico.
- Base portadora
- Agua
- Base química
- Dispersión acuosa
- Color
- Amarillo claro
- Presentación
- Bidón 20 L
- Pedido mínimo
- 1 envase
Etiquetado y seguridad
Revisión de la FDS: GHS 4.0 — 16.11.2025
Palabra de advertencia: Atención
Indicaciones de peligro
- H315: Provoca irritación cutánea.
- H319: Provoca irritación ocular grave.
Consejos de prudencia
- P280: Llevar guantes/gafas/máscara de protección.
- P302+P352: EN CASO DE CONTACTO CON LA PIEL: Lavar con abundante agua.
- P305+P351+P338: EN CASO DE CONTACTO CON LOS OJOS: Enjuagar con agua cuidadosamente durante varios minutos. Quitar las lentes de contacto cuando estén presentes y pueda hacerse con facilidad. Proseguir con el lavado.
- P321: Se necesita un tratamiento específico (ver en esta etiqueta).
- P332+P313: En caso de irritación cutánea: Consultar a un médico.
- P362+P364: Quitar las prendas contaminadas y lavarlas antes de volver a usarlas.
Información suplementaria
- EUH208: Contiene Sulfonic acids, petroleum, calcium salts, 1,2-benzisothiazol-3(2H)-one, 2-methyl-2,3dihydro-1,2-thiazol-3-one; 5-chloro-2-methyl-2,3-dihydro-1,2-thiazol-3-one. Puede provocar una reacción alérgica.
Documentación
Ficha técnica en español Guía de aplicación Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
Tectyl 5506W-I is a waterborne, quick drying, general purpose polymer/ wax-based corrosion preventive compound. Tectyl 5506W-I is excellent for long term protection of metallic surfaces against corrosion in either indoor or outdoor exposure, like machinery, machine rolls/tools, dies, tubing, and spare parts. Tectyl 5506W-I cures to a clear-light yellow/amber colored, translucent firm and elastic film.
Benefits and application considerations
- Superior Protection At the recommended DFT, Tectyl 5506W-I provides extraordinary long protection against corrosion.
- Processing Tectyl 5506W-I is a fast-drying protective coating.
- Environment Tectyl 5506W-I is a water-based compound with low Volatile Organic Compound (VOC).
Technical characteristics
- Carrier
- Water
- Recommended Dry Film Thickness — Range
- 50 µm
- Corrosion — ISO 9227 NSS (min. days)
- 40 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 40 days
- Protection Indoor — (min. months)
- 48 months
- Protection Outdoor — (min. months)
- 36 months
- Bending Test — DIN 53152
- Pass
Surface preparation
The maximum performance of Tectyl 5506W-I can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Please test prior to use. Practical evaluation is preferred when planning to exchange solvent based corrosion preventatives by water-based corrosion preventatives.
Application
Tectyl 5506W-I is formulated to be used as supplied. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Do not thin Tectyl 5506W-I. Tectyl 5506W-I can be applied by SST airless spray system or low-pressure air spray. The product can also be dipped or painted. Details on application can be found in the application chart.
Removal
Tectyl 5506W-I in the wet phase can be removed with water or Tectyl Biocleaner. If dried and cured Tectyl 5506W-I can be removed with Tectyl Biocleaner.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.