Ir al contenido

Tectyl™ Cavity Wax Non Solvent — Aerosol 500 ml

Referencia 23600110
17,03 € Imp. excl.

Consultar disponibilidad

Fecha estimada de envío: 19/11/2026

Términos y condiciones
Grantía de devolución de 30 días
Envío: 2-3 días laborables

Información técnica y de seguridad

Selección preferente Producto químico

Empresas de la UE con NIF intracomunitario válido pueden pagar el producto y el transporte estimado juntos al finalizar la compra. El transporte es el 10 % del subtotal de mercancía sin IVA; la expedición exige verificar la documentación de seguridad en el idioma de destino y los requisitos de transporte químico.

Base portadora
Sin disolvente
Base química
Resina y aceite
Color
Amarillo claro
Presentación
Aerosol 500 ml
Pedido mínimo
1 unidad

Etiquetado y seguridad

Revisión de la FDS: GHS 5.0 — 23.03.2026

Palabra de advertencia: Peligro

GHS02: Llama

Indicaciones de peligro

  • H222: Aerosol extremadamente inflamable.
  • H229: Recipiente a presión: Puede reventar si se calienta.

Consejos de prudencia

  • P101: Si se necesita consejo médico, tener a mano el envase o la etiqueta.
  • P102: Mantener fuera del alcance de los niños.
  • P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
  • P211: No pulverizar sobre una llama abierta u otra fuente de ignición.
  • P251: No perforar ni quemar, incluso después de su uso.
  • P410+P412: Proteger de la luz del sol. No exponer a temperaturas superiores a 50 °C/122 °F.

Información suplementaria

  • EUH208: Contiene Cobalt bis(2-ethylhexanoate). Puede provocar una reacción alérgica.

Etiquetado adicional

Extremadamente inflamable. Mantener fuera del alcance de los niños. Contiene gas a presión: Puede reventar si se calienta. Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar. No perforar ni quemar, incluso después de su uso. Proteger de la luz del sol. No exponer a temperaturas superiores a 50 °C/122°F.

Documentación

Ficha técnica en español Ficha de datos de seguridad

Las fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.

Tectyl Cavity Wax Non Solvent is a resin/oil based, light brown/yellow, corrosion preventive. Its non-solvent properties ensure high efficiency, an advantageous environmental profile, with almost free from organic solvent and generates almost no smell. Tectyl Cavity Wax Non Solvent is developed for industrial applications, giving good penetration into folds, flanges and cracks, as well as for the inside of car doors and other hollow sections of cars and rolling equipment. Tectyl Cavity Wax Non Solvent cures to a light yellow, translucent, semi-soft film.

Benefits and application considerations

  • Superior Protection At the recommended DFT, the product provides extraordinary protection in the hollow sections, even in small seams and crevices, against corrosion.
  • Strong penetration With a DFT of only 50 microns, Tectyl 4D750 is an efficient corrosion protection, protecting a large area with a small amount of the product.

Technical characteristics

Carrier
Non Solvent
Recommended Dry Film Thickness — Over metal profile
50 µm
Corrosion — ISO 9227 NSS (min. days)
15 days
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
50 days
Protection Indoor — (min. months)
60 months
SFS 4086: 2006
Pass

Surface preparation

The maximum performance of Tectyl Cavity Wax Non Solvent can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.

Application

Tectyl Cavity Wax Non Solvent gives a maximum performance when it is sprayed at an ambient and product temperature of 10-25 °C. Shake the can well before use and spray at a distance of approximately 30 cm from the surface.

Tectyl Cavity Wax Non Solvent is fast drying, and this can cause ‘pin-holing’ when applied too thick at once. It is advised to spray one layer per pass, wait for 2 to 3 minutes and then spray another layer. Continue like this until the required film thickness has been obtained.

Removal

Tectyl Cavity Wax Non Solvent can be removed in the wet phase with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl Cavity Wax Non Solvent can be removed with Tectyl 150 or Tectyl Biocleaner.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.