Información técnica y de seguridad
Empresas de la UE con NIF intracomunitario válido pueden pagar el producto y el transporte estimado juntos al finalizar la compra. El transporte es el 10 % del subtotal de mercancía sin IVA; la expedición exige verificar la documentación de seguridad en el idioma de destino y los requisitos de transporte químico.
- Base portadora
- Disolvente
- Base química
- Caucho y resina
- Color
- Negro
- Presentación
- Aerosol 500 ml
- Pedido mínimo
- 1 unidad
Etiquetado y seguridad
Revisión de la FDS: GHS 5.0 — 16.11.2025
Palabra de advertencia: Peligro
Indicaciones de peligro
- H222: Aerosol extremadamente inflamable.
- H229: Recipiente a presión: Puede reventar si se calienta.
- H315: Provoca irritación cutánea.
- H319: Provoca irritación ocular grave.
- H336: Puede provocar somnolencia o vértigo.
- H411: Tóxico para los organismos acuáticos, con efectos nocivos duraderos.
Consejos de prudencia
- P101: Si se necesita consejo médico, tener a mano el envase o la etiqueta.
- P102: Mantener fuera del alcance de los niños.
- P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
- P211: No pulverizar sobre una llama abierta u otra fuente de ignición.
- P251: No perforar ni quemar, incluso después de su uso.
- P271: Utilizar únicamente en exteriores o en un lugar bien ventilado.
- P273: Evitar su liberación al medio ambiente.
- P391: Recoger el vertido.
- P405: Guardar bajo llave.
- P410+P412: Proteger de la luz del sol. No exponer a temperaturas superiores a 50 °C/122 °F.
- P501: Eliminar el contenido/el recipiente en toda instalación de tratamiento de residuos autorizada.
Etiquetado adicional
Extremadamente inflamable. Mantener fuera del alcance de los niños. Contiene gas a presión: Puede reventar si se calienta. Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar. No perforar ni quemar, incluso después de su uso. Proteger de la luz del sol. No exponer a temperaturas superiores a 50 °C/122°F.
Componentes peligrosos para el etiquetado
Naphtha (petroleum), hydrotreated light, Hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics, Methyl Ethyl Ketone, Cyclohexane
Documentación
Ficha técnica en español Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
Tectyl Stone Chipping Black is a black colored, solvent cutback, rubber/resin-based corrosion preventive. The product is fast drying, has sound deadening properties and can be painted over. Specially developed to protect the underbody of cars, trucks, trailers, and other vehicles against corrosion and abrasive damage. Tectyl Stone Chipping Black cures to a black, firm, resilient, tough abrasive resistant film.
Benefits and application considerations
- Strong and elastic protection Tectyl Stone Chipping Black will protect against corrosion and creates a strong and elastic layer to prevent stone chipping on your vehicle.
- Overcoatable Tectyl Stone Chipping Black is overcoatable, which keeps vehicles looking great.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 250 µm
- Corrosion — ISO 9227 NSS (min. days)
- 20 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 42 days
- Protection Indoor — (min. months)
- 18 months
- Protection Outdoor — (min. months)
- 12 months
- Gravel-o-Meter (Stone chip) Test SAE-J-400
- 4A - 4B
Surface preparation
The maximum performance of Tectyl Stone Chipping Black can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl Stone Chipping Black gives a maximum performance when it is sprayed at an ambient and product temperature of 10-25 °C. Shake the can well before use and spray at a distance of approximately 30 cm from the surface.
Tectyl Stone Chipping Black is fast-drying, and this can cause ‘pin-holing’ when applied too thick at once. It is advised to spray one layer per pass, wait for 2 to 3 minutes and then spray another layer. Continue like this until the required film thickness has been obtained.
Removal
Tectyl Stone Chipping Black can be removed in the wet phase with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl Stone Chipping Black can be removed with Tectyl Biocleaner or Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.