Información técnica y de seguridad
Empresas de la UE con NIF intracomunitario válido pueden pagar el producto y el transporte estimado juntos al finalizar la compra. El transporte es el 10 % del subtotal de mercancía sin IVA; la expedición exige verificar la documentación de seguridad en el idioma de destino y los requisitos de transporte químico.
- Base portadora
- Agua
- Base química
- Base acuosa
- Color
- Transparente
- Presentación
- Bidón 20 L
- Pedido mínimo
- 1 Envase
Etiquetado y seguridad
Revisión de la FDS: GHS 4.0 — 16.11.2025
Palabra de advertencia: Atención
Indicaciones de peligro
- H317: Puede provocar una reacción alérgica en la piel.
Consejos de prudencia
- P261: Evitar respirar la niebla/los vapores.
- P272: Las prendas de trabajo contaminadas no podrán sacarse del lugar de trabajo.
- P280: Llevar guantes de protección.
- P333+P313: En caso de irritación o erupción cutánea: Consultar a un médico.
- P362+P364: Quitar las prendas contaminadas y lavarlas antes de volver a usarlas.
- P501: Eliminar el contenido/el recipiente en toda instalación de tratamiento de residuos autorizada.
Componentes peligrosos para el etiquetado
Propylene glykol alkyl phenyl ether, 1,2-benzisothiazol-3(2H)-one, 2-methyl-2,3-dihydro-1,2-thiazol-3-one; 5-chloro-2-methyl-2,3-dihydro-1,2-thiazol-3-one, Anhydride
Documentación
Ficha técnica en español Guía de aplicación Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
TECTYL 3217 E has been specially designed for use as an environmentally friendly protector of unfinished metal and industrial finishes. The dry film is tack free and prevents dust build up. TECTYL 3217 E is excellent for use on aluminum and galvanized surfaces as protector. Eliminates water spotting caused by acidic rain or hard water. TECTYL 3217 E cures to a transparent, resilient, firm film.
Benefits and application considerations
- Superior protection Tectyl 3217 E is an excellent preservative for the storage or transit protection of finished and unfinished automotive parts.
- Environment Tectyl 3217 E is a water-based product with low VOC content.
- Easy application Due to the viscosity Tectyl 3217 E is easy to apply and forms excellent film formation at suitable layer thickness for highest efficiency.
- Fast drying With a dry to touch time of 30-60 minutes and a cure time of 8 hours Tectyl 3217 E is a fast-drying protective coating.
Technical characteristics
- Carrier
- Water
- Recommended Dry Film Thickness — Over metal profile
- 50 µm
- Corrosion — ISO 9227 NSS (min. days)
- 21 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 12 months
Surface preparation
The maximum performance of Tectyl 3217 E can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl 3217 E is formulated to be used as supplied. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Always ensure uniform consistency prior to use. Avoid contamination with other products in pumps and lines. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. For application Tectyl 3217 E CorPro recommends a low pressure airspray application or airless application with a small airless nozzle. Details on application can be found in the application chart.
Removal
Tectyl 3217 E is not intended for removal.
In the wet phase Tectyl 3217 E can be removed with water or with Tectyl Biocleaner. If dried and cured Tectyl 3217 E can be removed with ethyl acetate.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.