Ir al contenido

Tectyl™ 5638W — Bidón 20 L

Referencia 23600063
Precio de compra Bidón completo de 20 L
582,00 € Imp. excl.

Consultar disponibilidad

Fecha estimada de envío: 19/11/2026

Precio informativo por litro 29,10 € por litro · Imp. excl.
La cantidad 1 corresponde a 1 bidón completo e indivisible, no a 1 litro.
Términos y condiciones
Grantía de devolución de 30 días
Envío: 2-3 días laborables

Información técnica y de seguridad

Selección preferente Producto químico

Empresas de la UE con NIF intracomunitario válido pueden pagar el producto y el transporte estimado juntos al finalizar la compra. El transporte es el 10 % del subtotal de mercancía sin IVA; la expedición exige verificar la documentación de seguridad en el idioma de destino y los requisitos de transporte químico.

Base portadora
Agua
Base química
Base acuosa
Color
Negro
Presentación
Bidón 20 L
Pedido mínimo
1 envase

Etiquetado y seguridad

Revisión de la FDS: GHS 3.0 — 16.11.2025

Esta mezcla no requiere elementos de etiqueta CLP según la FDS vigente.

Documentación

Ficha técnica en español Guía de aplicación Ficha de datos de seguridad

Las fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.

Tectyl 5638W is a water dispersed, fast drying, sound damping compound. Cures to a black, hard film. Tectyl 5638W is very suitable for industrial application on cars, trains, and other rolling equipment. Tectyl 5638W can be used for sound and vibration reduction on vehicle parts; doors, hoods, gear coverings, etc., air ventilation systems, glass and garbage containers, machine constructions and boiler covers in the heating sector. Tectyl 5638W can be applied with a spatula or with special spray equipment. Tectyl 5638W can be painted over, when dry, with synthetic resin-, epoxy- and PVC-based paints. Tectyl 5638W is fast drying, by evaporation of water, to a black, hard film.

Benefits and application considerations

  • Sound dampening Tectyl 5638W dampens vibrations and reduces sound.
  • Environment Tectyl 5638W is a water-based compound with a minimum amount of Volatile Organic Compound Content. The product is pH neutral.

Technical characteristics

Carrier
Water
Recommended Dry Film Thickness — Over metal profile
1000 µm
Protection Indoor — (min. months)
24 months
Protection Outdoor — (min. months)
9 months
Vibration Damping — ASTM 756
0.18
Fire Approval — DIN 54837
S4, SR2, ST2

Surface preparation

The maximum performance of Tectyl 5638W can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Non-galvanized steel and raw aluminum must be protected with an anti-corrosion primer prior to application of Tectyl 5638W.

Application

Tectyl 5638W is formulated to be used as supplied. Ensure uniform consistency prior to use. Avoid contamination with other products in pumps and lines. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Do not thin Tectyl 5638W. Small areas of Tectyl 5638W can be applied with a spatula. For larger areas spraying is advised. CorPro recommends the use of a stainless steel airless spray system. Details on application can be found in the application chart.

Removal

When in the wet phase Tectyl 5638W can be removed with (hot) water. When dry, Tectyl 5638W can be removed with Ethyl Acetate.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.