Ir al contenido

Tectyl™ 506-WD — Bidón 20 L

Referencia 23600030
Precio de compra Bidón completo de 20 L
352,66 € Imp. excl.

Consultar disponibilidad

Fecha estimada de envío: 19/11/2026

Precio informativo por litro 17,63 € por litro · Imp. excl.
La cantidad 1 corresponde a 1 bidón completo e indivisible, no a 1 litro.
Términos y condiciones
Grantía de devolución de 30 días
Envío: 2-3 días laborables

Información técnica y de seguridad

Selección preferente Producto químico

Empresas de la UE con NIF intracomunitario válido pueden pagar el producto y el transporte estimado juntos al finalizar la compra. El transporte es el 10 % del subtotal de mercancía sin IVA; la expedición exige verificar la documentación de seguridad en el idioma de destino y los requisitos de transporte químico.

Base portadora
Disolvente
Base química
Cera
Color
Ámbar
Presentación
Bidón 20 L
Pedido mínimo
1 envase

Etiquetado y seguridad

Revisión de la FDS: GHS 7.0 — 09.02.2026

Palabra de advertencia: Atención

GHS02: LlamaGHS07: Signo de exclamación

Indicaciones de peligro

  • H226: Líquidos y vapores inflamables.
  • H336: Puede provocar somnolencia o vértigo.

Consejos de prudencia

  • P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
  • P261: Evitar respirar la niebla/los vapores.
  • P303+P361+P353: EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente toda la ropa contaminada. Enjuagar la piel con agua.
  • P304+P340: EN CASO DE INHALACIÓN: Transportar a la persona al aire libre y mantenerla en una posición que le facilite la respiración.
  • P312: Llamar a un CENTRO DE TOXICOLOGÍA/médico si la persona se encuentra mal.
  • P370+P378: En caso de incendio: Utilice arena seca, polvo extintor o espuma resistente al alcohol para extinguir.
  • P403+P233: Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.

Información suplementaria

  • EUH066: La exposición repetida puede provocar sequedad o formación de grietas en la piel.

Componentes peligrosos para el etiquetado

Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics

Tectyl 506-WD is solvent cutback, wax base, thixotropic, dark amber, water displacing corrosion preventive compound. Tectyl 506-WD is recommended for long-term protection of ferrous and non-ferrous metals, as an underbody coating of autos, trucks, trailers, etc. Tectyl 506-WD cures to a relatively firm, dark amber, resilient film. Tectyl 506-WD is the Water Displacing version of Tectyl 506.

Benefits and application considerations

  • Superior Protection At the recommended DFT Tectyl 506-WD will protect against corrosion during storage, domestic and overseas transport.
  • Inside and outside protection Tectyl 506-WD has excellent water displacement properties, which makes it suitable for inside and outside protection.
  • Processing Tectyl 506-WD is easy to apply and easy to remove, when no longer needed.
  • Economical With a DFT of only 50 microns, Tectyl 506-WD can protect a large surface with just little amount of the product.

Technical characteristics

Carrier
Solvent
Recommended Dry Film Thickness — Over metal profile
50 µm
Corrosion — ISO 9227 NSS (min. days)
25 days
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
100 days
Protection Indoor — (min. months)
24 months
Protection Outdoor — (min. months)
12 months

Surface preparation

The maximum performance of Tectyl 506-WD can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale and a substrate temperature of 10-35 °C at the time of product application.

Application

Tectyl 506-WD is formulated to be used as supplied. Due to its composition Tectyl 506-WD can be subject to postproduction viscosity changes and/or wax sedimentation. Always ensure homogeneous consistency by agitation before use. If the product thickens due to cold storage or loss of solvent during use, thinning with max. 1-2% of Tectyl 150 is possible to get the desired consistency. Incorrect thinning will affect film build, dry time and potentially product performance. Tectyl 506-WD can be applied by airless spray, low pressure air spray or brush. Details on application can be found in the application chart.

Removal

Tectyl 506-WD can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl 506-WD can be removed with Tectyl Biocleaner or Tectyl 150.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.