Información técnica y de seguridad
Empresas de la UE con NIF intracomunitario válido pueden pagar el producto y el transporte estimado juntos al finalizar la compra. El transporte es el 10 % del subtotal de mercancía sin IVA; la expedición exige verificar la documentación de seguridad en el idioma de destino y los requisitos de transporte químico.
- Base portadora
- Cera
- Base química
- Cera
- Color
- Aluminio
- Presentación
- Bidón 20 L
- Pedido mínimo
- 1 envase
Etiquetado y seguridad
Revisión de la FDS: GHS 11.0 — 07.08.2026
Palabra de advertencia: Atención
Indicaciones de peligro
- H226: Líquidos y vapores inflamables.
- H336: Puede provocar somnolencia o vértigo.
Consejos de prudencia
- P210: Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
- P303+P361+P353: EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente toda la ropa contaminada. Enjuagar la piel con agua o ducharse.
- P403+P233: Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.
- P501: Eliminar el contenido/recipiente conforme a la reglamentación local/regional/nacional/internacional.
Información suplementaria
- EUH066: La exposición repetida puede provocar sequedad o formación de grietas en la piel.
Componentes peligrosos para el etiquetado
Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics, Ethyl acetate
Documentación
Ficha técnica en español Guía de aplicación Ficha de datos de seguridadLas fichas técnicas se sirven desde Coapsys y se obtienen de la fuente oficial Tectyl Europe.
Tectyl 127 CGW is a solvent cutback, wax based, thixotropic, gelled, aluminum pigmented corrosion preventive compound. Tectyl 127 CGW can been used to give long term protection of metal surfaces against corrosion in weathering, moist and salt corrosive atmospheres. Tectyl 127 CGW cures to a firm, non-tacky, resilient, tough film with aluminum color.
Benefits and application considerations
- Protection in Industrial environment Tectyl 127 CGW is suitable as a protective coating in industrial environments, such as piping, flanges, nuts and bolts.
- Very good in outdoor use Tectyl 127 CGW is highly UV resistant, making it an excellent solution in an outdoor environment.
- Processing Tectyl 127 CGW is an easy to apply, gelled and thixotropic coating.
- Industrial look With the aluminum look, Tectyl 127 CGW does not only protect against corrosion, it also makes your protected parts look good.
Technical characteristics
- Carrier
- Wax
- Recommended Dry Film Thickness — Over metal profile
- 200 µm
- Corrosion — ISO 9227 NSS (min. days)
- 50 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 24 months
Surface preparation
The maximum performance of Tectyl 127 CGW can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl 127 CGW is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl 127 CGW can be applied by airless spray or brush. Details on application can be found in the application chart.
Removal
Tectyl 127 CGW can be removed in the wet phase with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured, Tectyl 127 CGW can be removed with Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.