All products

Tectyl 300G Clear E is a waterborne corrosion preventive coating. The cured film is hard, transparent and flexible. Tectyl 300G Clear E provides an effective barrier against corrosive environments for ferrous and non-ferrous fabrications and industrial components.

TECTYL 3217 E has been specially designed for use as an environmentally friendly protector of unfinished metal and industrial finishes. The dry film is tack free and prevents dust build up. TECTYL 3217 E is excellent for use on aluminum and galvanized surfaces as protector. Eliminates water spotting caused by acidic rain or hard water. TECTYL 3217 E cures to a transparent, resilient, firm film.

Tectyl TM 400-C is a solvent cutback, wax base, corrosion preventive compound. Tectyl TM 400-C is designed to protect metal surfaces against corrosion in long-term indoor or short- term outdoor exposure and during domestic and overseas shipment. Tectyl TM 400-C cures to a dark amber colored, waxy, transparent, firm film.

Tectyl 472 is a solvent cutback, water displacing, oil-based corrosion preventive compound and penetrant. Tectyl 472 is used to protect industrial parts during long-term indoor or covered storage, and during domestic shipment. Tectyl 472 cures to an ultra-light, transparent oil film.

Tectyl 4D750 is a resin/oil based, light yellow, liquid corrosion preventive compound. Tectyl 4D750 is formulated with a minimum of volatile organic components. Tectyl 4D750 is designed for industrial application giving good penetration into folds, flanges and cracks, making it very suitable as a corrosion protective for the inside of car doors and other hollow sections of cars and rolling equipment. Tectyl 4D750 cures to a light yellow, translucent, semi-soft film.

Tectyl 506-EH is a solvent cutback, wax base, general purpose, corrosion preventive compound suitable for the widest range of application requirements for vehicle rustproofing, protection of machinery and parts in storage. Tectyl 506-EH protects parts in indoor and outdoor storage as well as domestic and international shipments. Tectyl 506-EH cures to a dark amber colored, waxy, translucent, firm film. Tectyl 506-EH is the Extra Heavy version of Tectyl 506.

Tectyl 5401W RC (Rust Converter) is a milky white-cream liquid, based on water reducible chelating polymers. It does not contain phosphoric acid. Tectyl 5401W RC can be used on rusted steel and sandblasted steel as a pre-coating preparation. It is compatible with most paint types and coating systems, such as alkyd systems, modified alkyds, chlorinated rubber, epoxies, polyurethanes, and vinyl’s. The product is non-hazardous, non-flammable. Tectyl 5401W RC can be applied on all rusted steel surfaces before painting or repainting when preparation by sandblasting is a problem, e.g. cargo holds, decks, hatch covers, superstructures, pipelines, winches, rails, etc. Tectyl 5401W RC can also be used on sandblasted surfaces to prevent or passivate ‘flash rust.’ It’s also particularly suitable for use in the highly corrosive marine atmosphere.

Tectyl™ 550-ML is a solvent-based, wax-based corrosion protection. Tectyl™ 550-ML has good water-displacing properties and good penetration, making it very suitable as corrosion protection for the inside of car doors and other hollow profiles of cars and other vehicles. Tectyl™ 550-ML cures to an amber-colored, waxy, semi-solid, translucent film.

Tectyl 558-AMC is an amber colored, solvent cutback, slightly thixotropic wax base corrosion preventive compound with good water displacing properties. Tectyl 558-AMC is primarily intended for spray application such as enclosed boxes, seams, joints and other creviced locations of vehicles, susceptible to corrosion. Tectyl 558-AMC is recommended as a primer coat for 2-layer systems for several solvent based Tectyl products. Tectyl 558-AMC dries to a dark amber colored, translucent, waxy, semi-firm, slightly tacky film.

Tectyl 5660W is a high non-volatile, filled, waterborne, thixotropic, quick drying, non-flammable, dispersion based corrosion preventive compound with extreme low VOC. Tectyl 5660W is developed as an abrasion resistant underbody coating for buses, vans and truck cabins. It is also suitable for complete undercoating of containers, trailers, etc. Tectyl 5660W is also an excellent sealant for wooden floors of buses, trucks, etc. Tectyl 5660W cures to a dark-grey black colored, abrasion resistant, resilient and tough film.

Tectyl 5660W FR is a high non-volatile, filled, waterborne, thixotropic, quick drying, fire resistance corrosion preventive compound. Tectyl 5660W FR is developed as an abrasion resistant, sound damping underbody coating for buses, truck cabins, trains and trams where EN 45545 HL2 classification is required. It is also suitable for complete undercoating of containers, trailers, etc. Tectyl 5660W FR cures to a dark-grey, colored, abrasion resistant, resilient and tough film. Tectyl 5660W FR is highly effective in reducing vibrational resonance conditions in structures such as sheet metal panels, floor housings, stainless sinks, and a multitude of other applications. Tectyl 5660W FR will dissipate structure-borne vibrational energy and reduces radiated air-borne noise. Tectyl 5660W FR is water based, non-toxic, non-flammable, and odorless and exhibits exceptional aging characteristics.

Tectyl 5765W-A is a waterborne, thixotropic, quick drying, polymer dispersion-based underbody coating with extreme low VOC content. Tectyl 5765W-A is developed as an abrasion resistant underbody coating for buses and truck cabins. It is also suitable for complete undercoating of containers, trailers, caravans and other recreational vehicles. Tectyl 5765W-A is also an excellent sealant for wooden floors of buses, trucks, caravans etc. Tectyl 5765W-A cures to a dark-grey colored, abrasion resistant, resilient, firm film.

Tectyl 800-D BF is a water displacing, low viscosity, lubricating corrosion preventive oil. The film is light, transparent and oily. Tectyl 800-D BF is recommended for the protection and lubrication of small arms and automatic weapons, industrial equipment, tools, pneumatic controls and light duty machinery and motors in moist, cold conditions. Tectyl 800-D BF serves as a light gauge wire preservative and a tube coating for undercover shipment and storage.

Tectyl 846-K-19 is a solvent cutback, wax based, general purpose, corrosion preventive compound which meets the performance requirements of Military Specification MIL-PRF-16173D, Grade 4, Class 1. Tectyl 846-K-19 is excellent for long term protection of metallic surfaces against corrosion in indoor and outdoor exposure during domestic and international shipments. Tectyl 846-K-19 is recommended for protection of general machinery, machine rolls/tools, automatic parts, dies, tubing, and spare parts. Tectyl 846-K-19 cures to a dark amber colored, waxy, translucent, firm film.

Tectyl 858-F is a homogeneous NLGI number 2 consistency grade multipurpose grease and corrosion preventive compound. Tectyl 858-F can be used for lubrication and surface corrosion protection of industrial and automotive equipment operating over the temperature range of -30° to 120 °C. Tectyl 858-F gives a greasy, amber and semi-transparent film.

Tectyl 892-D is a solvent black cutback, extreme corrosion preventive compound with cures to a firm film. Tectyl 892-D provides long-term indoor and outdoor protection for metallic surfaces as well as for domestic and international shipments. Tectyl 892-D meets Military Specifications MIL-PRF-16173E, Grade 1, Class I, for zinc, aluminum, and steel.

Tectyl 915W40 is an API CH-4/SJ SAE 15W-40 corrosion preventive, internal combustion engine oil, meeting the corrosion properties of MIL-L-21260. Tectyl 915W40 is an excellent preservative and break-in oil for reciprocating spark-ignition and compression-ignition engines in all types of ground equipment.

Tectyl 930 is an API CH-4/SJ SAE 30 corrosion preventive, internal combustion engine oil, meeting the corrosion properties of MIL-L-21260. Tectyl 930 is an excellent preservative and break-in oil for reciprocating spark-ignition and compression-ignition engines in all types of ground equipment.

Tectyl Bodysafe is a solvent cutback wax/asphaltic base, thixotropic corrosion preventive compound. Tectyl Bodysafe is suitable to be applied to the undersides of vehicles. Tectyl Bodysafe cures to a relatively firm, black, resilient, tough film.

Tectyl Cavity Wax Amber is a wax based, solvent cutback, amber colored corrosion preventive. It has good water displacing and penetration properties, making it very suitable as a corrosion protective for the inside of car doors and other hollow sections of cars and rolling equipment. Tectyl Cavity Wax Amber cures to an amber colored, waxy, semi-firm translucent film.

Tectyl Multipurpose Waterbased has been specially designed for use as a versatile corrosion preventive. It provides an excellent barrier against corrosive environments for ferrous and non-ferrous applications, industrial components, parts and many more. Tectyl Multipurpose Waterbased cures to a transparent, hard but flexible film.

Tectyl TPC Invisible is a corrosion preventive concentrate, developed for diluting in water. Tectyl TPC Invisible can be used as a temporary surface corrosion protection of industrial and automotive parts and equipment for indoor storage, without the need for removal afterwards. Tectyl TPC Invisible gives a clear, transparent and, in most cases, a non-tacky film.

Tectyl Underbody Coating Bronze is a solvent cutback wax/asphaltic base, corrosion preventive. It is especially suitable to be applied to the underbody of vehicles. Tectyl Underbody Coating Bronze cures to a bronze colored, resilient, tough and abrasive resistant film.

45:1 - Bomba Dura-Flo de 290 cc con motor neumático NXT 6500, construcción de acero inoxidable para uso intensivo

55:1 - Bomba Check-Mate de 250 cc con motor neum?tico NXT 6500, construcci?n de acero al carbono para uso intensivo

57:1 - Bomba Dura-Flo de 220 cc con motor neumático NXT 6500, construcción de acero inoxidable para uso intensivo

715, AMORTIGUADOR DE PULSACIONES VÁLVULA, ALTA FRECUENCIA, BOMBA/VÁLVULA, NITRURADO

ABRAZADERA, GROUNDING

ACCESORIO, 1/4 X 1/8 NPTF HEXAGONAL ROJO

ACCESORIO, 3/8 X 1/4 NPTF HEXAGONAL ROJO

ACCESORIO, MANGUITO, TUBO, 3/16, LATÓN

ACCESORIO, MANGUITO, TUBO, 5/16, LATÓN

ACCESORIO, NIPLE 1/4 X 1/4 ACERO HEXAGONAL

Sistema AccuFlo 1K monocomponente con bomba de engranajes. Color: Bomba de engranajes de acero inoxidable, 6 cc, hasta 6 colores, con bypass y limpieza de eje. Configuración: Bomba simple.

ACOPLADOR - DBL ACERO ANCHOR T/A PC

ACOPLADOR - SLV 1/4

ACOPLAMIENTO, ANCHOR CRUCE 1/8

ACOPLAMIENTO, ANCHOR RECTO 1/4

ACOPLAMIENTO, ANCHOR RECTO 1/8

ACOPLAMIENTO, EXTERIOR 1/8F TO 1/8M