Technical and safety information
Online Tectyl checkout is currently configured for Spain. For deliveries elsewhere in Europe, contact Coapsys to confirm availability and shipping before ordering.
- Carrier
- Other
- Chemical base
- Según ficha técnica oficial
- Colour
- Aluminio
- Pack format
- Consultar formatos disponibles
- Minimum order
- Consultar
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 892-D is a solvent black cutback, extreme corrosion preventive compound with cures to a firm film. Tectyl 892-D provides long-term indoor and outdoor protection for metallic surfaces as well as for domestic and international shipments. Tectyl 892-D meets Military Specifications MIL-PRF-16173E, Grade 1, Class I, for zinc, aluminum, and steel.
Benefits and application considerations
- Superior Protection At the recommended DFT Tectyl 892-D provides extraordinary protection against corrosion during storage, domestic and overseas transport.
- Inside and outside protection Tectyl 892-D can protect parts stored outside due to its excellent corrosion and UV-protection.
- Processing Tectyl 892-D is easy to apply and easy to remove, when no longer needed.
- Economical With a DFT of only 60 microns, Tectyl 892-D can protect a large surface with just a little amount of the product.
Technical characteristics
- Recommended Dry Film Thickness — Over metal profile
- 60 µm
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 60 months
- Protection Outdoor — (min. months)
- 48 months
Surface preparation
The maximum performance of Tectyl 892-D can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Tectyl recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl 892-D is formulated to be used as supplied. Tectyl recommends that the ambient and product temperature be 10-35 °C at the time of product application. Do not thin Tectyl 892-D. Ensure uniform consistency prior to use. Avoid contamination with other products in pumps and lines. Tectyl 892-D can be applied by low pressure air spray, brush or dipping. Details on application can be found in the application chart.
Removal
Tectyl 892-D can in the wet phase be removed with Tectyl™ Biocleaner, Tectyl™ 150 or low-pressure steam. If dried and cured, Tectyl 892-D can be removed with Tectyl Biocleaner or Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.