Technical and safety information
Online Tectyl checkout is currently configured for Spain. For deliveries elsewhere in Europe, contact Coapsys to confirm availability and shipping before ordering.
- Carrier
- Water
- Chemical base
- Dispersión acuosa
- Colour
- Amarillo claro
- Pack format
- Drum 20 L
- Minimum order
- 1 envase
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Application guide Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 5506W-I is a waterborne, quick drying, general purpose polymer/ wax-based corrosion preventive compound. Tectyl 5506W-I is excellent for long term protection of metallic surfaces against corrosion in either indoor or outdoor exposure, like machinery, machine rolls/tools, dies, tubing, and spare parts. Tectyl 5506W-I cures to a clear-light yellow/amber colored, translucent firm and elastic film.
Benefits and application considerations
- Superior Protection At the recommended DFT, Tectyl 5506W-I provides extraordinary long protection against corrosion.
- Processing Tectyl 5506W-I is a fast-drying protective coating.
- Environment Tectyl 5506W-I is a water-based compound with low Volatile Organic Compound (VOC).
Technical characteristics
- Carrier
- Water
- Recommended Dry Film Thickness — Range
- 50 µm
- Corrosion — ISO 9227 NSS (min. days)
- 40 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 40 days
- Protection Indoor — (min. months)
- 48 months
- Protection Outdoor — (min. months)
- 36 months
- Bending Test — DIN 53152
- Pass
Surface preparation
The maximum performance of Tectyl 5506W-I can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Please test prior to use. Practical evaluation is preferred when planning to exchange solvent based corrosion preventatives by water-based corrosion preventatives.
Application
Tectyl 5506W-I is formulated to be used as supplied. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Do not thin Tectyl 5506W-I. Tectyl 5506W-I can be applied by SST airless spray system or low-pressure air spray. The product can also be dipped or painted. Details on application can be found in the application chart.
Removal
Tectyl 5506W-I in the wet phase can be removed with water or Tectyl Biocleaner. If dried and cured Tectyl 5506W-I can be removed with Tectyl Biocleaner.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.