Skip to Content

Tectyl™ 511-M — Drum 20 L

Referencia 23600032
Purchase price Full drum of 20 L
411.28 € VAT incl.

Consultar disponibilidad

Estimated shipping date: 20/11/2026

Indicative price per litre 20.56 € per litre · VAT incl.
Quantity 1 means one complete, indivisible drum, not one litre.
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Technical and safety information

Preferred selection Chemical product

The manufacturer's English SDS advises against private or household use of this reference. For delivery to other EU countries, checkout is limited to professional buyers with a validated EU VAT number. Dispatch requires destination-language safety documentation and chemical transport checks.

Carrier
Solvent
Chemical base
Según ficha técnica oficial
Colour
Transparente
Pack format
Drum 20 L
Minimum order
1 envase

CLP hazard and safety information

English SDS revision: 2026-03-05

Use restriction: The manufacturer's SDS advises against private or household use.

Signal word: Warning

GHS02 hazard pictogramGHS07 hazard pictogram

Hazard statements

  • H226: Flammable liquid and vapour.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

Precautionary statements

  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P280: Wear protective gloves/eye protection/face protection.
  • P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P403+P233: Store in a well-ventilated place. Keep container tightly closed.
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Supplemental hazard information

  • EUH066: Repeated exposure may cause skin dryness or cracking.

This excerpt follows section 2.2 of the linked English SDS. Consult the full SDS and the product label before use. Request the official SDS and label in your destination country's language before dispatch; include the Tectyl reference, destination country and order number.

Tectyl 511-M is a solvent cutback, water displacing, oil-based corrosion preventive compound. Tectyl 511-M meets the performance requirements of Military Specification MIL-PRF-16173E Grade 5, Class 1. Tectyl 511-M is designed to protect ferrous and non-ferrous industrial parts and transportation components during covered shipment and inside storage. Tectyl 511-M cures to a light amber colored, transparent oily film.

Benefits and application considerations

  • Superior ProtectionAt the recommended DFT Tectyl 511-M will protect against corrosion during storage and domestic transport.
  • ProcessingTectyl 511-M is easy to apply and easy to remove, when no longer needed.
  • EconomicalWith a DFT of only 7.5 microns, Tectyl 511-M can protect a large surface area with just a little amount of the product.

Technical characteristics

Carrier
Solvent
Recommended Dry Film Thickness — Over metal profile
8 µm
Corrosion — ISO 9227 NSS (min. days)
20 days
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
40 days
Protection Indoor — (min. months)
18 months
Protection Outdoor — (min. months)
6 months
MIL-PRF-16173E — Grade / class
5/1

Surface preparation

The maximum performance of Tectyl 511-M can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.

Application

Tectyl 511-M is formulated to be used as supplied. Do not thin Tectyl 511-M. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl 511-M can be applied by low pressure air spray or dipping. Details on application can be found in the application chart.

Removal

Tectyl 511-M can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl 511-M can be removed with Tectyl Biocleaner or Tectyl 150.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.