Technical and safety information
- Carrier
- Water
- Chemical base
- Dispersión acuosa
- Colour
- Gris oscuro
- Pack format
- Consultar formatos disponibles
- Minimum order
- Consultar
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Application guide Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 5765W-A is a waterborne, thixotropic, quick drying, polymer dispersion-based underbody coating with extreme low VOC content. Tectyl 5765W-A is developed as an abrasion resistant underbody coating for buses and truck cabins. It is also suitable for complete undercoating of containers, trailers, caravans and other recreational vehicles. Tectyl 5765W-A is also an excellent sealant for wooden floors of buses, trucks, caravans etc. Tectyl 5765W-A cures to a dark-grey colored, abrasion resistant, resilient, firm film.
Benefits and application considerations
- Superior Protection At the recommended DFT, the product provides extraordinary protection against stone chipping and corrosion.
- Multi-functional The underbody coating can also be used on different substrates, like the metal chassis, but also other materials, such as the wooden underside of a camper, caravan or trailer.
Technical characteristics
- Carrier
- Water
- Recommended Dry Film Thickness — Over metal profile
- 350 µm
- Corrosion — ISO 9227 NSS (min. days)
- 21 days
- Humidity — ISO 6270-2 CH (min. days)
- 21 days
- Protection Indoor — (min. months)
- 24 months
- Protection Outdoor — (min. months)
- 18 months
Surface preparation
The maximum performance of Tectyl 5765W-A can be achieved only when the surfaces to be protected are clean, dry and free of rust and oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Non-galvanized steel and raw aluminum must be protected with an anti-corrosion primer prior to application of Tectyl 5765W-A.
Application
Tectyl 5765W-A is formulated to be used as supplied. Ensure uniform consistency prior to use. Avoid contamination with other products in pumps and lines. CorPro recommends that the ambient and product temperature be 10-35°C at the time of product application. Do not thin Tectyl 5765W-A. For application Tectyl 5765W-A CorPro recommends airless. Details on application can be found in the application chart.
Removal
Tectyl 5765W-A is not intended for removal. In the wet phase Tectyl 5765W-A can be removed with water or Tectyl Biocleaner or low-pressure steam. If dried and cured, the film cannot be removed.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.