Technical and safety information
EU business customers with a validated VAT number can pay for the product and estimated shipping together at checkout. Shipping is 10% of the merchandise subtotal before VAT; dispatch follows destination-language safety documentation and chemical transport checks.
- Carrier
- Solvent
- Chemical base
- Cera y asfalto
- Colour
- Negro
- Pack format
- Drum 20 L
- Minimum order
- 1 envase
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Application guide Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 121-LV is a filled, solvent cutback wax/asphaltic base, thixotropic, corrosion preventive compound. Tectyl 121-LV is suitable for the complete undercoating of undersides of autos, trucks, buses, truck trailers, camp trailers, heavy construction equipment and cargo containers. Tectyl 121-LV is very suitable as a coating in industrial constructions of ovens and chimneys, where high temperatures and in between periods under the dew point can occur. Tectyl 121-LV dries to a firm, black, resilient, tough and abrasion resistant film.
Benefits and application considerations
- Protection at high temperatures Tectyl 121-LV is very suitable as a protective coating in areas where high temperatures in combination with periods under the dew point occur.
- Multi-functional Tectyl 121-LV can be applied on many different vehicles, such as cars, trucks, busses, campers and construction equipment, but also trailers and caravans.
- Processing Tectyl 121-LV is an easy to apply, elastic, protective underbody coating.
- Multiple substrates The underbody coating can also be used on different substrates, such as the wooden underside of a camper or caravan.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 250 µm
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 21 months
Surface preparation
The maximum performance of Tectyl 121-LV can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Avoid direct contact of the product with PVC due to possible material incompatibility.
Application
Tectyl 121-LV is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl 121-LV can be applied by airless spray or brush. Details on application can be found in the application chart.
Removal
Tectyl 121-LV in the wet phase can be removed in the wet phase with Tectyl Biocleaner or Tectyl 150 or low-pressure steam. If dried and cured the film of Tectyl 121-LV can be removed with Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.