Technical and safety information
Online Tectyl checkout is currently configured for Spain. For deliveries elsewhere in Europe, contact Coapsys to confirm availability and shipping before ordering.
- Carrier
- Water
- Chemical base
- Según ficha técnica oficial
- Colour
- Transparente
- Pack format
- Consultar formatos disponibles
- Minimum order
- Consultar
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl Multipurpose Waterbased has been specially designed for use as a versatile corrosion preventive. It provides an excellent barrier against corrosive environments for ferrous and non-ferrous applications, industrial components, parts and many more. Tectyl Multipurpose Waterbased cures to a transparent, hard but flexible film.
Benefits and application considerations
- Superior protection Tectyl Multipurpose Waterbased is an excellent corrosion preventative for the storage or transit protection of finished and unfinished automotive parts.
- Flexible Due to its physical properties, the surface will be protected for a long period, even with a 180° Mandrell Bend.
- Easy application Applying is fast and easy. Tectyl Multipurpose Waterbased can be applied direct to metal.
- Apply almost everywhere Because of the transparent, flexible coating, which is also over-paintable, Tectyl Multipurpose Waterbased can be used almost everywhere.
Technical characteristics
- Carrier
- Water
- Recommended Dry Film Thickness — Over metal profile
- 50 µm
- Corrosion — ISO 9227 NSS (min. days)
- 13 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 21 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 24 months
Surface preparation
The maximum performance of Tectyl Multipurpose Waterbased can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl Multipurpose Waterbased gives a maximum performance when it is sprayed at an ambient and product temperature of 10-25 °C. Shake the can well before use and spray at a distance of approximately 30 cm from the surface.
Tectyl Multipurpose Waterbased is fast-drying, and this can cause ‘pin-holing’ when applied too thick at once. It is advised to spray one layer per pass, wait for 2 to 3 minutes and then spray another layer. Continue like this until the required film thickness has been obtained.
Removal
Tectyl Multipurpose Waterbased can be removed in the wet phase with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured, Tectyl Multipurpose Waterbased can be removed with ethyl acetate.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.