Technical and safety information
Online Tectyl checkout is currently configured for Spain. For deliveries elsewhere in Europe, contact Coapsys to confirm availability and shipping before ordering.
- Carrier
- Solvent
- Chemical base
- Cera y asfalto
- Colour
- Negro
- Pack format
- Consultar formatos disponibles
- Minimum order
- Consultar
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl Bodysafe is a solvent cutback wax/asphaltic base, thixotropic corrosion preventive compound. Tectyl Bodysafe is suitable to be applied to the undersides of vehicles. Tectyl Bodysafe cures to a relatively firm, black, resilient, tough film.
Benefits and application considerations
- Superior Protection At the recommended DFT, Tectyl Bodysafe gives extraordinary protection against stone chipping and corrosion.
- Multi-functional Tectyl Bodysafe can be applied on many different vehicles, such as cars, trucks, busses, campers, but also trailers and caravans.
- Processing Tectyl Bodysafe is an easy to apply, elastic, protective underbody coating.
- Multiple substrates The underbody coating can also be used on different substrates, such as the wooden underside of a camper or caravan.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 250 µm
- Corrosion — ISO 9227 NSS (min. days)
- 40 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 18 months
Surface preparation
The maximum performance of Tectyl Bodysafe can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Avoid direct contact of the product with PVC due to possible material incompatibility.
Application
Tectyl Bodysafe is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10-35 °C at the time of product application. Do not apply Tectyl Bodysafe on mechanical moving parts or on catalytic converters. Tectyl Bodysafe can be applied by brush. Details on application can be found in the application chart.
Removal
In the wet phase Tectyl Bodysafe can be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl Bodysafe can be removed with Tectyl Biocleaner or Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.