Technical and safety information
Online Tectyl checkout is currently configured for Spain. For deliveries elsewhere in Europe, contact Coapsys to confirm availability and shipping before ordering.
- Carrier
- Solvent
- Chemical base
- Cera
- Pack format
- Consultar formatos disponibles
- Minimum order
- Consultar
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Application guide Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 1079 is a light colored, solvent cutback, wax based, paint preservative compound. Tectyl 1079 protects painted surfaces against atmospheric and environmental influences during transportation and storage. Tectyl 1079 cures to a light colored, translucent, firm film.
Benefits and application considerations
- Superior Protection At the recommended DFT Tectyl 1079 protects painted surfaces against corrosion.
- Processing Tectyl 1079 is an easy to apply product, which only needs a thin dry film thickness of 20 microns.
- Multi-functional Tectyl 1079 will protect your products in many different situations. During local transport, storage and overseas shipment.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 20 µm
- Corrosion — ISO 9227 NSS (min. days)
- 2 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 15 days
- Protection Indoor — (min. months)
- 12 months
- Protection Outdoor — (min. months)
- 6 months
Surface preparation
The maximum performance of Tectyl 1079 can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Before application of the Tectyl 1079 the painted surfaces should be properly cured. It is recommended to test the painted surfaces, the rubbers and the synthetic parts if they are solvent resistant before application of the Tectyl 1079.
Application
Tectyl 1079 is formulated to be used as supplied. It is recommended that the ambient and product temperature be 15-35 °C at the time of product application. Tectyl 1079 can be applied by airless or low-pressure air spray. Details on application can be found in the application chart. Tectyl 1079 should be stirred before usage.
Removal
Tectyl 1079 can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl 1079 can be removed with Tectyl 150. If the applied surface is placed under direct sunlight, the material must be removed within 3 months and re-applied otherwise removal will be difficult.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.