Technical and safety information
Online Tectyl checkout is currently configured for Spain. For deliveries elsewhere in Europe, contact Coapsys to confirm availability and shipping before ordering.
- Carrier
- Other
- Chemical base
- Aceite
- Colour
- Transparente
- Pack format
- Consultar formatos disponibles
- Minimum order
- Consultar
For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.
Documents
Technical Data Sheet (English) Application guide Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 800-D BF is a water displacing, low viscosity, lubricating corrosion preventive oil. The film is light, transparent and oily. Tectyl 800-D BF is recommended for the protection and lubrication of small arms and automatic weapons, industrial equipment, tools, pneumatic controls and light duty machinery and motors in moist, cold conditions. Tectyl 800-D BF serves as a light gauge wire preservative and a tube coating for undercover shipment and storage.
Benefits and application considerations
- Superior protection At the recommended DFT, water resistance and displacement provide exceptionally protection against corrosion.
- Environment Tectyl 800-D BF is completely barium-free.
- Processing Tectyl 800-D BF is an easy-to-apply, protective coating.
- Economical Due to the thin film required, larges area can be protected with little product.
Technical characteristics
- Carrier
- Non Solvent
- Recommended Dry Film Thickness — Over metal profile
- 7 µm
- Corrosion — ISO 9227 NSS (min. days)
- 2 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 40 days
- Protection Indoor — (min. months)
- 24 months
- Protection Outdoor — (min. months)
- 12 months
Surface preparation
The maximum performance of Tectyl 800-D BF can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl 800-D BF is formulated to be used as supplied. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Do no thin Tectyl 800-D BF. Tectyl 800-D BF can be applied by low pressure air spray, line lubricators or dip. Details on application can be found in the application chart.
Removal
In the wet and dried phase Tectyl 800-D BF can be removed with Tectyl Biocleaner or Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.