Skip to Content

Tectyl™ 5506W-I — Drum 20 L

Referencia 23600121
Purchase price Full drum of 20 L
619.71 € VAT incl.

Consultar disponibilidad

Estimated shipping date: 20/11/2026

Indicative price per litre 30.99 € per litre · VAT incl.
Quantity 1 means one complete, indivisible drum, not one litre.
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Technical and safety information

Preferred selection Chemical product

The manufacturer's English SDS advises against private or household use of this reference. For delivery to other EU countries, checkout is limited to professional buyers with a validated EU VAT number. Dispatch requires destination-language safety documentation and chemical transport checks.

Carrier
Water
Chemical base
Dispersión acuosa
Colour
Amarillo claro
Pack format
Drum 20 L
Minimum order
1 envase

CLP hazard and safety information

English SDS revision: 2025-11-16

Use restriction: The manufacturer's SDS advises against private or household use.

Signal word: Warning

GHS07 hazard pictogram

Hazard statements

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

Precautionary statements

  • P280: Wear protective gloves/eye protection/face protection.
  • P302+P352: IF ON SKIN: Wash with plenty of water.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P321: Specific treatment (see on this label).
  • P332+P313: If skin irritation occurs: Get medical advice/attention.
  • P362+P364: Take off contaminated clothing and wash it before reuse.

Supplemental hazard information

  • EUH208: Contains Sulfonic acids, petroleum, calcium salts, 1,2-benzisothiazol-3(2H)-one, 2-methyl-2,3-dihydro-1,2-thiazol-3-one; 5-chloro-2-methyl-2,3-dihydro-1,2-thiazol-3-one. May produce an allergic reaction.

This excerpt follows section 2.2 of the linked English SDS. Consult the full SDS and the product label before use. Request the official SDS and label in your destination country's language before dispatch; include the Tectyl reference, destination country and order number.

Tectyl 5506W-I is a waterborne, quick drying, general purpose polymer/ wax-based corrosion preventive compound. Tectyl 5506W-I is excellent for long term protection of metallic surfaces against corrosion in either indoor or outdoor exposure, like machinery, machine rolls/tools, dies, tubing, and spare parts. Tectyl 5506W-I cures to a clear-light yellow/amber colored, translucent firm and elastic film.

Benefits and application considerations

  • Superior Protection At the recommended DFT, Tectyl 5506W-I provides extraordinary long protection against corrosion.
  • Processing Tectyl 5506W-I is a fast-drying protective coating.
  • Environment Tectyl 5506W-I is a water-based compound with low Volatile Organic Compound (VOC).

Technical characteristics

Carrier
Water
Recommended Dry Film Thickness — Range
50 µm
Corrosion — ISO 9227 NSS (min. days)
40 days
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
40 days
Protection Indoor — (min. months)
48 months
Protection Outdoor — (min. months)
36 months
Bending Test — DIN 53152
Pass

Surface preparation

The maximum performance of Tectyl 5506W-I can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Please test prior to use. Practical evaluation is preferred when planning to exchange solvent based corrosion preventatives by water-based corrosion preventatives.

Application

Tectyl 5506W-I is formulated to be used as supplied. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Do not thin Tectyl 5506W-I. Tectyl 5506W-I can be applied by SST airless spray system or low-pressure air spray. The product can also be dipped or painted. Details on application can be found in the application chart.

Removal

Tectyl 5506W-I in the wet phase can be removed with water or Tectyl Biocleaner. If dried and cured Tectyl 5506W-I can be removed with Tectyl Biocleaner.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.