Technical and safety information
EU consumers can pay for the product and estimated shipping together, with Spanish VAT while the distance-sales conditions are met. Businesses with a validated EU VAT number may qualify for VAT exemption at checkout. Shipping is 10% of the merchandise subtotal before VAT; dispatch requires destination-language safety documentation and chemical transport checks.
- Carrier
- Water
- Chemical base
- Base acuosa
- Colour
- Negro
- Pack format
- Drum 20 L
- Minimum order
- 1 envase
CLP hazard and safety information
English SDS revision: 2025-11-16
Not classified as hazardous under CLP; label elements are not required according to section 2.2 of this SDS.
This excerpt follows section 2.2 of the linked English SDS. Consult the full SDS and the product label before use. Request the official SDS and label in your destination country's language before dispatch; include the Tectyl reference, destination country and order number.
Documents
Technical Data Sheet (English) Application guide Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 5638W is a water dispersed, fast drying, sound damping compound. Cures to a black, hard film. Tectyl 5638W is very suitable for industrial application on cars, trains, and other rolling equipment. Tectyl 5638W can be used for sound and vibration reduction on vehicle parts; doors, hoods, gear coverings, etc., air ventilation systems, glass and garbage containers, machine constructions and boiler covers in the heating sector. Tectyl 5638W can be applied with a spatula or with special spray equipment. Tectyl 5638W can be painted over, when dry, with synthetic resin-, epoxy- and PVC-based paints. Tectyl 5638W is fast drying, by evaporation of water, to a black, hard film.
Benefits and application considerations
- Sound dampening Tectyl 5638W dampens vibrations and reduces sound.
- Environment Tectyl 5638W is a water-based compound with a minimum amount of Volatile Organic Compound Content. The product is pH neutral.
Technical characteristics
- Carrier
- Water
- Recommended Dry Film Thickness — Over metal profile
- 1000 µm
- Protection Indoor — (min. months)
- 24 months
- Protection Outdoor — (min. months)
- 9 months
- Vibration Damping — ASTM 756
- 0.18
- Fire Approval — DIN 54837
- S4, SR2, ST2
Surface preparation
The maximum performance of Tectyl 5638W can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application. Non-galvanized steel and raw aluminum must be protected with an anti-corrosion primer prior to application of Tectyl 5638W.
Application
Tectyl 5638W is formulated to be used as supplied. Ensure uniform consistency prior to use. Avoid contamination with other products in pumps and lines. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Do not thin Tectyl 5638W. Small areas of Tectyl 5638W can be applied with a spatula. For larger areas spraying is advised. CorPro recommends the use of a stainless steel airless spray system. Details on application can be found in the application chart.
Removal
When in the wet phase Tectyl 5638W can be removed with (hot) water. When dry, Tectyl 5638W can be removed with Ethyl Acetate.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.