Skip to Content

Tectyl™ 3217 E — Drum 20 L

Referencia 23600082
Purchase price Full drum of 20 L
646.33 € VAT incl.

Consultar disponibilidad

Estimated shipping date: 20/11/2026

Indicative price per litre 32.32 € per litre · VAT incl.
Quantity 1 means one complete, indivisible drum, not one litre.
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Technical and safety information

Preferred selection Chemical product

EU consumers can pay for the product and estimated shipping together, with Spanish VAT while the distance-sales conditions are met. Businesses with a validated EU VAT number may qualify for VAT exemption at checkout. Shipping is 10% of the merchandise subtotal before VAT; dispatch requires destination-language safety documentation and chemical transport checks.

Carrier
Water
Chemical base
Base acuosa
Colour
Transparente
Pack format
Drum 20 L
Minimum order
Consultar

For current hazard statements, precautions and transport information, consult the official English Safety Data Sheet before purchase or use. This page is not a substitute for the product label.

TECTYL 3217 E has been specially designed for use as an environmentally friendly protector of unfinished metal and industrial finishes. The dry film is tack free and prevents dust build up. TECTYL 3217 E is excellent for use on aluminum and galvanized surfaces as protector. Eliminates water spotting caused by acidic rain or hard water. TECTYL 3217 E cures to a transparent, resilient, firm film.

Benefits and application considerations

  • Superior protection Tectyl 3217 E is an excellent preservative for the storage or transit protection of finished and unfinished automotive parts.
  • Environment Tectyl 3217 E is a water-based product with low VOC content.
  • Easy application Due to the viscosity Tectyl 3217 E is easy to apply and forms excellent film formation at suitable layer thickness for highest efficiency.
  • Fast drying With a dry to touch time of 30-60 minutes and a cure time of 8 hours Tectyl 3217 E is a fast-drying protective coating.

Technical characteristics

Carrier
Water
Recommended Dry Film Thickness — Over metal profile
50 µm
Corrosion — ISO 9227 NSS (min. days)
21 days
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
100 days
Protection Indoor — (min. months)
36 months
Protection Outdoor — (min. months)
12 months

Surface preparation

The maximum performance of Tectyl 3217 E can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.

Application

Tectyl 3217 E is formulated to be used as supplied. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. Always ensure uniform consistency prior to use. Avoid contamination with other products in pumps and lines. CorPro recommends that the ambient and product temperature be 10-35 °C at the time of product application. For application Tectyl 3217 E CorPro recommends a low pressure airspray application or airless application with a small airless nozzle. Details on application can be found in the application chart.

Removal

Tectyl 3217 E is not intended for removal.

In the wet phase Tectyl 3217 E can be removed with water or with Tectyl Biocleaner. If dried and cured Tectyl 3217 E can be removed with ethyl acetate.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.