Technical and safety information
The manufacturer's English SDS advises against private or household use of this reference. For delivery to other EU countries, checkout is limited to professional buyers with a validated EU VAT number. Dispatch requires destination-language safety documentation and chemical transport checks.
- Carrier
- Solvent
- Chemical base
- Cera
- Colour
- Ámbar
- Pack format
- Drum 20 L
- Minimum order
- 1 envase
CLP hazard and safety information
English SDS revision: 2026-02-09
Use restriction: The manufacturer's SDS advises against private or household use.
Signal word: Warning
Hazard statements
- H226: Flammable liquid and vapour.
- H336: May cause drowsiness or dizziness.
Precautionary statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P261: Avoid breathing mist/vapours.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
- P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P312: Call a POISON CENTRE/doctor if you feel unwell.
- P370+P378: In case of fire: Use dry sand, extinguishing powder or alcohol-resistant foam to extinguish.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Supplemental hazard information
- EUH066: Repeated exposure may cause skin dryness or cracking.
This excerpt follows section 2.2 of the linked English SDS. Consult the full SDS and the product label before use. Request the official SDS and label in your destination country's language before dispatch; include the Tectyl reference, destination country and order number.
Documents
Technical Data Sheet (English) Application guide Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 506-WD is solvent cutback, wax base, thixotropic, dark amber, water displacing corrosion preventive compound. Tectyl 506-WD is recommended for long-term protection of ferrous and non-ferrous metals, as an underbody coating of autos, trucks, trailers, etc. Tectyl 506-WD cures to a relatively firm, dark amber, resilient film. Tectyl 506-WD is the Water Displacing version of Tectyl 506.
Benefits and application considerations
- Superior Protection At the recommended DFT Tectyl 506-WD will protect against corrosion during storage, domestic and overseas transport.
- Inside and outside protection Tectyl 506-WD has excellent water displacement properties, which makes it suitable for inside and outside protection.
- Processing Tectyl 506-WD is easy to apply and easy to remove, when no longer needed.
- Economical With a DFT of only 50 microns, Tectyl 506-WD can protect a large surface with just little amount of the product.
Technical characteristics
- Carrier
- Solvent
- Recommended Dry Film Thickness — Over metal profile
- 50 µm
- Corrosion — ISO 9227 NSS (min. days)
- 25 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 24 months
- Protection Outdoor — (min. months)
- 12 months
Surface preparation
The maximum performance of Tectyl 506-WD can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale and a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl 506-WD is formulated to be used as supplied. Due to its composition Tectyl 506-WD can be subject to postproduction viscosity changes and/or wax sedimentation. Always ensure homogeneous consistency by agitation before use. If the product thickens due to cold storage or loss of solvent during use, thinning with max. 1-2% of Tectyl 150 is possible to get the desired consistency. Incorrect thinning will affect film build, dry time and potentially product performance. Tectyl 506-WD can be applied by airless spray, low pressure air spray or brush. Details on application can be found in the application chart.
Removal
Tectyl 506-WD can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl 506-WD can be removed with Tectyl Biocleaner or Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.