Skip to Content

Tectyl™ Cavity Wax Non Solvent

Referencia 23600110
20.61 € VAT incl.

Consultar disponibilidad

Estimated shipping date: 19/11/2026

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Technical and safety information

Preferred selection Chemical product

EU consumers can pay for the product and estimated shipping together, with Spanish VAT while the distance-sales conditions are met. Businesses with a validated EU VAT number may qualify for VAT exemption at checkout. Shipping is 10% of the merchandise subtotal before VAT; dispatch requires destination-language safety documentation and chemical transport checks.

Carrier
Other
Chemical base
Resina y aceite
Colour
Amarillo claro
Pack format
Aerosol 500 ml
Minimum order
1 unit

CLP hazard and safety information

English SDS revision: 2026-03-23

Signal word: Danger

GHS02 hazard pictogram

Hazard statements

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.

Precautionary statements

  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Supplemental hazard information

  • EUH208: Contains Cobalt bis(2-ethylhexanoate). May produce an allergic reaction.

This excerpt follows section 2.2 of the linked English SDS. Consult the full SDS and the product label before use. Request the official SDS and label in your destination country's language before dispatch; include the Tectyl reference, destination country and order number.

Tectyl Cavity Wax Non Solvent is a resin/oil based, light brown/yellow, corrosion preventive. Its non-solvent properties ensure high efficiency, an advantageous environmental profile, with almost free from organic solvent and generates almost no smell. Tectyl Cavity Wax Non Solvent is developed for industrial applications, giving good penetration into folds, flanges and cracks, as well as for the inside of car doors and other hollow sections of cars and rolling equipment. Tectyl Cavity Wax Non Solvent cures to a light yellow, translucent, semi-soft film.

Benefits and application considerations

  • Superior Protection At the recommended DFT, the product provides extraordinary protection in the hollow sections, even in small seams and crevices, against corrosion.
  • Strong penetration With a DFT of only 50 microns, Tectyl 4D750 is an efficient corrosion protection, protecting a large area with a small amount of the product.

Technical characteristics

Carrier
Non Solvent
Recommended Dry Film Thickness — Over metal profile
50 µm
Corrosion — ISO 9227 NSS (min. days)
15 days
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
50 days
Protection Indoor — (min. months)
60 months
SFS 4086: 2006
Pass

Surface preparation

The maximum performance of Tectyl Cavity Wax Non Solvent can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.

Application

Tectyl Cavity Wax Non Solvent gives a maximum performance when it is sprayed at an ambient and product temperature of 10-25 °C. Shake the can well before use and spray at a distance of approximately 30 cm from the surface.

Tectyl Cavity Wax Non Solvent is fast drying, and this can cause ‘pin-holing’ when applied too thick at once. It is advised to spray one layer per pass, wait for 2 to 3 minutes and then spray another layer. Continue like this until the required film thickness has been obtained.

Removal

Tectyl Cavity Wax Non Solvent can be removed in the wet phase with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl Cavity Wax Non Solvent can be removed with Tectyl 150 or Tectyl Biocleaner.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.