Skip to Content

Tectyl™ Multipurpose Transparent — Aerosol 500 ml

Referencia 23600107
15.97 € VAT incl.

Consultar disponibilidad

Estimated shipping date: 20/11/2026

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Technical and safety information

Preferred selection Chemical product

EU consumers can pay for the product and estimated shipping together, with Spanish VAT while the distance-sales conditions are met. Businesses with a validated EU VAT number may qualify for VAT exemption at checkout. Shipping is 10% of the merchandise subtotal before VAT; dispatch requires destination-language safety documentation and chemical transport checks.

Carrier
Solvent
Chemical base
Según ficha técnica oficial
Colour
Transparente
Pack format
Aerosol 500 ml
Minimum order
1 unit

CLP hazard and safety information

English SDS revision: 2025-03-30

Signal word: Danger

GHS02 hazard pictogramGHS07 hazard pictogram

Hazard statements

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • H412: Harmful to aquatic life with long lasting effects.

Precautionary statements

  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P271: Use only outdoors or in a well-ventilated area.
  • P405: Store locked up.
  • P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
  • P501: Dispose of contents/container to an authorized waste treatment facility.

Supplemental hazard information

  • EUH066: Repeated exposure may cause skin dryness or cracking.

This excerpt follows section 2.2 of the linked English SDS. Consult the full SDS and the product label before use. Request the official SDS and label in your destination country's language before dispatch; include the Tectyl reference, destination country and order number.

Tectyl Multipurpose Transparent is a solvent cutback, resin based, transparent, corrosion preventive. It has good water displacing properties and can be used as a versatile corrosion protective for a wide variety of applications on ferrous and non-ferrous metals: automotive, marine, household and Industrial like tools, chromium-plated parts (wheels of bicycles). Tectyl Multipurpose Transparent provides special protection to industrial and auto electrical wiring and contacts such as ignition coils, spark plugs wires and terminals. Tectyl Multipurpose Transparent cures to a hard, transparent and colorless film.

Benefits and application considerations

  • Superior Protection At the recommended DFT Tectyl Multipurpose Transparent will protect against corrosion.
  • Non-conducting The special nonconductive formulation makes Tectyl Multipurpose Transparent the ideal product to protect wiring in cars and industrial applications.
  • Processing Tectyl Multipurpose Transparent is easy to apply and easy to remove, when no longer needed.
  • Economical With a Dry Film Thickness of only 45 microns, Tectyl Multipurpose Transparent can protect a big surface with just a little amount of the product.

Technical characteristics

Carrier
Solvent
Recommended Dry Film Thickness — Over metal profile
50 µm
Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
75 days
Protection Indoor — (min. months)
36 months
Protection Outdoor — (min. months)
6 months

Surface preparation

The maximum performance of Tectyl Multipurpose Transparent can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.

Application

Tectyl Multipurpose Transparent gives a maximum performance when it is sprayed at an ambient and product temperature of 10-25 °C. Shake the can well before use and spray at a distance of approximately 30 cm from the surface.

Tectyl Multipurpose Transparent is fast drying, and this can cause ‘pin-holing’ when applied too thick at once. It is advised to spray one layer per pass, wait for 2 to 3 minutes and then spray another layer. Continue like this until the required film thickness has been obtained.

Removal

Tectyl Multipurpose Transparent can be removed in the wet phase with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl Multipurpose Transparent can be removed with Tectyl 150.

Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.