Technical and safety information
EU consumers can pay for the product and estimated shipping together, with Spanish VAT while the distance-sales conditions are met. Businesses with a validated EU VAT number may qualify for VAT exemption at checkout. Shipping is 10% of the merchandise subtotal before VAT; dispatch requires destination-language safety documentation and chemical transport checks.
- Carrier
- Wax
- Chemical base
- Cera
- Colour
- Ámbar
- Pack format
- Aerosol 500 ml
- Minimum order
- 1 unit
CLP hazard and safety information
English SDS revision: 2025-03-30
Signal word: Danger
Hazard statements
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H336: May cause drowsiness or dizziness.
Precautionary statements
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
- P271: Use only outdoors or in a well-ventilated area.
- P405: Store locked up.
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
- P501: Dispose of contents/container to an authorized waste treatment facility.
Supplemental hazard information
- EUH066: Repeated exposure may cause skin dryness or cracking.
This excerpt follows section 2.2 of the linked English SDS. Consult the full SDS and the product label before use. Request the official SDS and label in your destination country's language before dispatch; include the Tectyl reference, destination country and order number.
Documents
Technical Data Sheet (English) Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl Multipurpose Amber is a wax based, solvent cutback, amber colored corrosion preventive. It has good water displacing and penetration properties, making it very suitable as a versatile corrosion protective for a wide variety of applications: automotive, marine, household and industrial. Tectyl Multipurpose Amber cures to an amber colored, waxy, semi-firm translucent film.
Benefits and application considerations
- Superior Protection At the recommended DFT, Tectyl Multipurpose Amber will protect against corrosion during storage, domestic and overseas transport.
- Inside and outside protection Tectyl Multipurpose Amber can protect parts stored inside as well as outside.
- Processing Tectyl Multipurpose Amber is easy to apply and easy to remove, when no longer needed.
- Economical With a Dry Film Thickness of only 50 microns, Tectyl Multipurpose Amber can protect a big surface with just a little amount of the product.
Technical characteristics
- Carrier
- Wax
- Recommended Dry Film Thickness — Over metal profile
- 50 µm
- Corrosion — ISO 9227 NSS (min. days)
- 21 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 75 days
- Protection Indoor — (min. months)
- 36 months
- Protection Outdoor — (min. months)
- 12 months
Surface preparation
The maximum performance of Tectyl Multipurpose Amber can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl Multipurpose Amber gives a maximum performance when it is sprayed at an ambient and product temperature of 10-25 °C. Shake the can well before use and spray at a distance of approximately 30 cm from the surface.
Tectyl Multipurpose Amber is fast-drying, and this can cause ‘pin-holing’ when applied too thick at once. It is advised to spray one layer per pass, wait for 2 to 3 minutes and then spray another layer. Continue like this until the required film thickness has been obtained.
Removal
Tectyl Multipurpose Amber can be removed in the wet phase with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured Tectyl Multipurpose Amber can be removed with Tectyl 150 or Tectyl Biocleaner.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.