Technical and safety information
The manufacturer's English SDS advises against private or household use of this reference. For delivery to other EU countries, checkout is limited to professional buyers with a validated EU VAT number. Dispatch requires destination-language safety documentation and chemical transport checks.
- Carrier
- Wax
- Chemical base
- Cera
- Colour
- Ámbar
- Pack format
- Drum 20 L
- Minimum order
- 1 envase
CLP hazard and safety information
English SDS revision: 2026-02-09
Use restriction: The manufacturer's SDS advises against private or household use.
Signal word: Danger
Hazard statements
- H226: Flammable liquid and vapour.
- H314: Causes severe skin burns and eye damage.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P233: Keep container tightly closed.
- P260: Do not breathe mist/vapours.
- P280: Wear protective gloves/eye protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
- P391: Collect spillage.
- P403+P235: Store in a well-ventilated place. Keep cool.
This excerpt follows section 2.2 of the linked English SDS. Consult the full SDS and the product label before use. Request the official SDS and label in your destination country's language before dispatch; include the Tectyl reference, destination country and order number.
Documents
Technical Data Sheet (English) Application guide Safety Data Sheet (English)Technical documents are served by Coapsys from the official Tectyl Europe source.
Tectyl 210-R is an amber colored, solvent cutback, wax base, thixotropic corrosion preventive compound. Tectyl 210-R is designed for protection at factory level of enclosed boxes, seams, joints and other creviced locations of vehicles, susceptible to corrosion. Tectyl 210-R cures to a semi-hard, waxy, light amber colored, translucent slightly tacky film.
Benefits and application considerations
- Excellent penetration Tectyl 210-R penetrates in all small seams and joints, protecting creviced locations against corrosion.
- Economical solution With the thin layer of only 50 microns a large area can be protected against corrosion.
- Suitable for OEM and aftermarket use Tectyl 210-R is suitable to be applied at the manufacturing site as well as in the aftermarket. This makes Tectyl 210-R a flexible and attractive solution against corrosion.
Technical characteristics
- Carrier
- Wax
- Recommended Dry Film Thickness — Over metal profile
- 50 µm
- Corrosion — ISO 9227 NSS (min. days)
- 21 days
- Humidity — Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH (Q-Panels, Type R, ASTM A1008)
- 100 days
- Protection Indoor — (min. months)
- 48 months
Surface preparation
The maximum performance of Tectyl 210-R can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. CorPro recommends that the metal substrate temperature is 10-35 °C at the time of product application.
Application
Tectyl 210-R is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10-35 °C at the time of product application. Do not dilute Tectyl 210-R. Incorrect dilution will affect film thickness, drying time and product performance. Tectyl 210-R can be applied by low pressure air spray technique. Details on application can be found in the application chart.
Removal
Tectyl 210-R can in the wet phase be removed with Tectyl Biocleaner, Tectyl 150 or low-pressure steam. If dried and cured the film of Tectyl 210-R can be removed with Tectyl Biocleaner or Tectyl 150.
Check the current official Technical Data Sheet and Safety Data Sheet before purchase or use. Coapsys can advise on product selection and application equipment.